Sign Stands for Roll-Up and Construction Signs

Sign Stands for Roll-Up and Construction Signs

Main Features:

1. The tops use a thin 1/8" wire, welded onto a 5/16" wire frame

28.5 inch full height includes 7 inch prongs, with a width of 10.75 inches

2. Weld the 2 top wires to the front side of the frame

3. Place the wires on the side of the frame with 2" overlap

4. Must be 2 weld spots (weld wires on frame)

5. No joints on frame

6. The bottom of the frame is to be cut at 45 degree

7. Surface: painted black, dip painting

8. Weight: 0.636385kg/piece

9. Packing: 20 per carton, Carton size is 75X27X 22cm

10. Be made of high quality steel rod and wire.

11. All dimensions are shown as height x width.

Sign Stands for Roll-Up and Construction Signs

Usage

1.Used in a school zone to remind pedestrians to slow down and watch for kids.

2. Be a decent size so that they can easily be seen from the road.

3. For advertising outdoors because the sign can be pushed into the ground by using the wire part.

4. To advertise for their favorite politician or to ask people to stay off of their grass.

Product Description

Sign Stands for Roll-Up and Construction Signs