ASTM A888/CISPI301 Hubless Cast Iron Soil Pipe
Code | Size | ID | OD | Barrel Thickness, T | Laying | PC/Pallet | |
Length, LB | |||||||
Inch | B | J | Nominal | Min | 10 ft ± 0.50 in | ||
(3048 ±13 mm) | |||||||
NH0156 | 1 1/2 ″ | 1.5±0.09 | 1.90±0.06 | 0.16 | 0.13 | 120 | 72 |
(38.1± 2.29) | (48.26±1.52) | 3.3 | 3048 | ||||
NH0158 | 2″ | 1.96±0.09 | 2.35±0.09 | 0.16 | 0.13 | 120 | 68 |
(49.8±2.29) | (59.69±2.29) | 3.3 | 3048 | ||||
NH0160 | 3″ | 2.96±0.09 | 3.35±0.09 | 0.16 | 0.13 | 120 | 44 |
(75.2±2.29) | (85.09±2.29) | 3.3 | 3048 | ||||
NH0162 | 4″ | 3.94±0.09 | 4.38 + 0.09−0.05 | 0.19 | 0.15 | 120 | 36 |
(100.08±2.29) | (111.25 + 2.29)(−1.27) | 3.81 | 3048 | ||||
NH0164 | 5″ | 4.94±0.09 | 5.30 + 0.09− 0.05 | 0.19 | 0.15 | 120 | 21 |
(125.48±2.29) | (134.62 + 2.29)(−1.27) | 3.81 | 3048 | ||||
NH0168 | 6″ | 5.94±0.09 | 6.30 + 0.09− 0.05 | 0.19 | 0.15 | 120 | 18 |
(150.88±2.29) | (160.02 + 2.29)(−1.27) | 3.81 | 3048 | ||||
NH0170 | 8″ | 7.94±0.13 | 8.38 + 0.09− 0.09 | 0.23 | 0.17 | 120 | 10 |
(201.68±3.3) | (212.85 + 3.3)(−2.29) | 4.32 | 3048 | ||||
NH0171 | 10″ | 10.00±0.13 | 10.56±0.09 | 0.28 | 0.22 | 120 | 8 |
(254±3.3) | (268.22±2.29) | 5.59 | 3048 | ||||
NH0172 | 12″ | 11.94±0.13 | 12.50±0.13 | 0.28 | 0.22 | 120 | 6 |
(303.28±3.3) | (317.5±3.3) | 5.59 | 3048 |
CSA B70 Hubless Cast Iron Soil Pipe
Size | Wall thickness | Min inside diameter | Outside Diameter | ||
inch | min(mm) | min (mm) | min(mm) | max(mm) | actual OD(mm) |
1½ | 3.60 | 35.50 | 46.00 | 50.00 | ≥48 |
2 | 3.60 | 47.80 | 57.00 | 62.00 | ≥60 |
3 | 3.80 | 73.00 | 83.00 | 87.50 | ≥86 |
4 | 4.40 | 98.60 | 109.00 | 114.00 | ≥112 |
6 | 4.80 | 148.00 | 160.00 | 166.00 | ≥164 |
8 | 5.50 | 197.00 | 213.00 | 219.00 | ≥216 |
10 | 7.10 | 246.00 | 267.00 | 271.00 | ≥269 |
12 | 7.10 | 297.00 | 318.00 | 322.00 | ≥320 |
15 | 9.20 | 370.00 | 397.00 | 402.00 | ≥400 |
What is the difference between the UPC mark and the cUPC mark? check here for our cUPC Certificte http://pld.iapmo.org/file_info.asp?file_no=0009122
Products with the UPC® mark are in compliance with applicable American codes and standards. Products with the cUPC® mark are in compliance with applicable American and Canadian codes and standards
ASTM A888/CISPI301/CSA B70 Hubless Cast Iron Soil Pipe
The gray cast iron soil pipes produced by centrifugal technology which are used in drainage sewer system and ventilation ducts system through a flexible linkage, which have have following advantages :flat straight,even pipe wall. high strength and density,high smoothness internal and external surface, no casting defect, easy installation, easy maintain, long using life, environmental protecting,fireproofing and no noise.
Internal and external painting: Black bitumen paint with an average dry thickness of 100 microns.
All pipe fittings are produced according to standard ASTM A888-05 /CISPI301/CSA B70 and not inflammable and not combustible.
ASTM A888 CISPI 301 No-hub Cast Iron Pipe Fitting EN877 SML hubless grey cast iron pipe fitting Sizes: degree: 88° Standard ASTM A888 Material Grey iron Application Construction drainage,pollution discharge,waste water rain water Painting inside epoxy paint in color yellow ...
Name ASTM A888 Cast Iron Hubless Fitings/BS EN877 Cast Iron Pipe Fittings Size Complete EN877 pipe range and sizes from DN40 to DN300, including the DE75, DN70 DN400 special for European market. Standard: ...