FDA silicone rubber to italy

FDA silicone rubber

Description of FDA silicone rubber
FDA silicone rubber is generally named two-components silicone rubber, Part A and part B. platinum cure silicone rubber features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for food making molds application. FDA silicone rubber FDA mainly used for making cake and chocolate , candy and any other FDA food product mold making etc. Advantage ofFDA silicone rubber
* low shrinkage (less than 0.1% ) *high tensile and tear strength with high copy times *easy for operation (mixing ratio at 1:1 ) *good fluidity easy for pouring operation ( in round 10000 cps )

OPERRATING INSTRUCTION of FDA silicone rubber :

1.Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE: Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.

Attention: Do not use the same container to hold addition cured silicone rubber and condensation one, and it is also forbidded to use the same rod to stir the condensation and addition cured silicone rubber)

Need any help on silicone rubber, please feel free to contact Ms Vicky:

Tel:86-755-89212382

Mob/Whatsapp:86-18988789545

E-mail: hyz(at)szrl(dot)net

Skype:vicky921106

Facebook & You Tube:silicone1106(at)gmail.com

Web:www.szrl.com

you can try for rubber    silicone rubber    to get through more products