Polyamide PA Foaming Agent is an endothermic chemical nucleating foaming master agent. It is used as a bubble nucleating agent in the physical foaming of PE and PS sheets to make the bubbles smaller and uniform, shorten the aging time, and can also solve the warpage and deformation during PP injection molding.
Product Name | Foaming Agent | Decomposition Temperature | Breath Volum(ml/g) | Recommended Addition | Applicable Materials | Features |
MS02W | Inorganic | 240℃ | 35 | 0.9% | ABS, PS, PA, POM, PP, PET, PC/ABS | High decomposition rate, suitable for high-temperature decomposition of plastics and injection molding products to prevent product collapse, warpage, and deformation |
PE, PS physical foaming lunch box, food and medicine gasket, PP injection molding.
1. Medium-density foaming masterbatch, uniform and stable fine closed-cell foam structure
2. The product complies with FDA standards, safe and environmentally friendly
3. Simplify the process and improve production efficiency
4. Improve warpage and deformation, excellent dimensional stability
Net weight: 25KG, 20KG, 1KG
Exterior | White particle |
Ingredient | Carbonate polymers |
Breath volume(ml/5g) | 180 |
Decomposition temperature(℃) | 155-210 |
Recommended amount(%) |
Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one of the professional nylon 6 suppliers/manufacturers, is also divided into toughened, heat-resistant, alloy and flame-retardant modified PA6. Nylon 6 (PA6) is made up of a group of 6 ...
Nylon 66 is polyamide 66. The main purpose of Nylon 66 plastic modification is to improve the properties of Nylon 66 material based on the original resin properties to meet specific requirements. The chemical and physical properties of Nylon 66 PA 66 are very similar to Nylon ...
Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one of the professional nylon 6 suppliers/manufacturers, is also divided into toughened, heat-resistant, alloy and flame-retardant modified PA6. Nylon 6 (PA6) is made up of a group of 6 ...
Nylon 66 is polyamide 66. The main purpose of Nylon 66 plastic modification is to improve the properties of Nylon 66 material based on the original resin properties to meet specific requirements. The chemical and physical properties of Nylon 66 PA 66 are very similar to Nylon ...
OBSH foaming agent is the variety with the largest production consumption among sulfonyl hydrazine foaming agents. It is a foaming agent with a very wide range of applications. It is called a universal foaming agent in plastics and rubber. It is an exothermic type of foaming ...
JOYSUN PVC white foaming agent belongs to endothermic white solid foaming agent. odorless. Its performance is stable and has good dispersibility.The foaming agent has good chromaticity, and the cells are uniform and dense. Our company provides PTSS/TSH and modified carbonate ...
AC blowing agent is the most commonly used blowing agent in plastic industry, it is non-flammable and self-extinguishing, non-toxic, non-polluting, non-discolored, insoluble in general plasticizers. The lower the fineness, the easier it is to disperse in plastic and rubber, it ...
Polyvinyl Chloride PVC Foaming Agent ●Description Polyvinyl Chloride PVC Foaming Agent is an endothermic polycarbonate chemical nucleating foaming master agent. The product produces a fine foam structure during the extrusion of HDPE and PP plastics, which can reduce product ...
Ethylene Vinyl Acetate Copolymer EVA Foaming Agent ●Description Ethylene Vinyl Acetate Copolymer EVA Foaming Agent is an endothermic chemical nucleating foaming master agent. It is used as a bubble nucleating agent in the physical foaming of PE and PS sheets to make the ...