GEARBOX HOUSING
Product Quick Detail
- Minimum Order
- 1
- Packaging
- N/A
- Delivery
- 15 Days
Specifications
The transmission housing is a housing structure used to install the transmission transmission mechanism and its accessories. In order to reduce part wear and power loss caused by internal
friction, lubricating oil must be injected into the housing, and splash lubrication is used to lubricate the working surfaces of gear pairs, shafts and bearings. Therefore, there is an oil filling
port on one side of the casing and an oil drain plug at the bottom, and the oil level is controlled by the position of the oil filling port. Radial oil holes are drilled on the constant meshing gear
of the first shaft and the third gear on the second shaft. The hub end faces of the reverse intermediate gear and the constant meshing transmission gear of the intermediate shaft are provided with
radial oil grooves to lubricate the rollers at the positions. Needle bearings. In order to prevent lubricating oil from flowing into the clutch from the gap between the first shaft and the bearing
cover and affecting its friction performance, an oil seal assembly is installed in the bearing cover, and there is an oil return groove in the inner hole of the bearing cover to prevent oil leakage.
To prevent lubricating oil from flowing out from the rear end of the second shaft. An oil seal assembly is installed in the rear bearing cap of the transmission. Install sealing gaskets on the joint
surfaces of each bearing cover, rear cover, upper cover, front and rear housing, etc., and apply sealant to prevent oil leakage. In order to prevent lubricating oil from leaking due to the increase
of oil temperature and pressure when the transmission is working, a vent plug is installed on the transmission mechanism seat and the rear bearing cover of the transmission.According to the different
structure of the transmission, the transmission housing is divided into three-shaft type and two-shaft type.
- Country: China (Mainland)
- Business Type:
- Market:Americas
- Founded Year:1993
- Address:No.55 Wohushan Road,Industry Park,Beilun Zone
- Contact:Robert Yang
Other products from Ningbo Jinda Die Casting Mould Technology Co., Ltd.
Relate products of GEARBOX HOUSING
PCD end mill, cbn end milling, mill for gearbox bottom
PCD/PCBN铣刀特点： ▲刃口采用激光技术，刃口锋利，切割轻盈，适合高速场合。 ▲中等粒度的PCD兼具耐磨性和抗崩刃性，综合性能优良。 ▲同一规格的直径，切削刃长度不同。 ...
White Color Modern House Design Exterior Decorative Steel Door Interior Style American Door
A timeless classic, white front doors add elegance to your home, no matter what the architectural style. Pair classic white front entry doors with a white interior to give off a modern farmhouse feel or pair them with a dark paint color to create contrast. Bring architectural ...
House Blend (AA) Pre-Roll | Hush Cannabis Club
Buy the House Blend (AA) hybrid strain to uplift your mood and relax your body. This cheap weed is available online at Hush Cannabis Club at exciting discounts. Plus, get free shipping on orders over $200. Visit https://420budslove.com/ WhatsApp_+1(484)519-849 ...
