12" x 2" Trailer Off Road Electric Brake Assembly

ATM (Aggregate Trailer Mass)

GTM (Gross Trailer Mass)

In Australia, all trailers with ATM or GTM over 2000kg must have a Breakaway Brake setup that will immediately apply the trailer brakes in the event of the trailer becoming disconnected from the towing vehicle. Off-road electric drum brake is both with mechanical parking and with off road design. The plastic core in the magnet will reduce the vibration and the high temperature so that this brake assembly could ensure you a safe drive when you facing the extremely rough road. Meanwhile the trailer axle repair will be easy.

Features

lElectric off road brakes assembly will work with or without brake actuator.

l12 inch x 2 inch trailer off road electric backing plate is electrophoretic-coated.

lNeeds only an electric brake controller to work.

lPeriodic manual adjustment required.

l12 inch trailer brake can work with most trailer axles 6000 lbs including Dexter, Hayes and many others. With the off road design, trailers can go through the rough road freely.

Specifications

ØDimension: 12 inch x 2inch

ØAxle Capability: 6000 lbs Axle

ØMounting Flange Bolt Pattern: 5 bolts

ØBrake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH

Product Composition

Ø12” x 2" Brake Shoe Set x 1

ØE-coat Backing Plate x 1

ØOff-Road Magnet x 1

ØMagnet Lever x 1

ØHandbrake x 1

ØSprings x 2

ØAdjuster x 1

ØMechanical park brake lever