Tobee® 16x14TU-AH Slurry Pumps provide a ideal replacement for many OEM slurry pumps used in Minerals processing plant, such as Mill Discharge, cyclone feed, transfer slurry tailing, dewatering, pipeline, Power plant, Chemical Process, sand and gravel process, and any other industry application need to transport heavy duty abrasive and corrosion medium.
Design Features:
√ Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime
√ Ductile iron fully lined casing provides durability, strength, safety, and long service life
√ Large diameter, slow turning, high efficiency slurry pump impellers designed to achieve maximum wear life and low operating costs
√ Large, open internal passages designed to reduce internal velocities, maximise wear life and lower operating costs
√ Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximise wear life
√ Minimal shaft/impeller overhang reduces shaft deflection and increases packing life
√ Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the slurry pump, resulting in reliable operation and prolonged bearing life
√ Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime
√ Optional dry running shaft seal reduces or eliminates flush water requirements
√ Effective expeller prolongs packing life while reducing or eliminating flush water requirement
Interchangeability of seal arrangements – full flush, low flow, centrifugal, or mechanical seals may be fitted to any sized slurry pump.
HEBEI TOBEE PUMP CO.,LIMITED
Email: Operation1@tobeepump.com | Skype: Tobee.Pump | Mob: +86-15633815619
www.tobeepump.com www.slurrypumpsupply.com www.tobee.cc www.hydroman.cn www.tobee.store
We are a companyover 20 years of experience specializing in the production of slurry pumps,focuses on research and development, and its business includes production, sales, after-sales maintenance and remote technical support. We have passed ISO9001 and our products are ...
1. The maximum lift of the rubber-lined impeller should not exceed 63m. The maximum allowable linear speed should not exceed 30m/m. 2. Bearings generally use rolling bearings and are lubricated with thin oil or grease. Their operating temperature should not exceed 75°C. 3. The ...
The AH slurry pump is a double-casing slurry pump. It has a high-chromium alloy lining and a rubber-lined lining. Today we will briefly talk about the characteristics of the rubber-lined slurry pump. 1. The head of the rubber-lined slurry pump does not exceed 63m; 2. Slurry ...
Rubber pump, AHR slurry pump, corrosion-resistant slurry pump generally means that the lining of the slurry pump is made of rubber. From the lining material of the slurry pump, it can be divided into rubber lining and metal lining (high chromium). The rubber pump is a slurry ...
AH type slurry pumps are commonly made of two materials: high chromium alloy and natural rubber. Today we are going to talk about slurry pumps made of natural rubber. Rubber slurry pumps are also called rubber-lined slurry pumps. They are characterized by corrosion resistance. ...
The common series of submersible slurry pumps produced by our factory include SP series and ZJL series. The SP series is further divided into SP and SPR. SP means that the flow parts are made of high chromium alloy, and SPR means that the parts below the flow parts and the ...
There is a correct gap value between the impeller and the rear guard plate of the slurry pump. We have previously introduced the method of adjusting the impeller clearance of the AH slurry pump. Today we will introduce how to adjust the impeller clearance of ZJ slurry pump. ...
The ZJ series slurry pump is also the most common slurry pump nowadays. It is a single-stage, single-suction, centrifugal horizontal slurry pump. This series of slurry pumps are divided into various specifications according to the outlet size: 350mm, 300mm, 250mm, 200mm, 150mm, ...
Is there any difference between the impeller of our ZJ series slurry pump and the impeller of AH series slurry pump? Let’s find out today. The impellers of our ZJ series slurry pumps, regardless of model size, have a common feature, that is, their channels are relatively ...
To assemble the bracket part of the ZJ slurry pump, first remove the dirt in the bracket cover and bracket body oil pool, and wipe the bearing holes clean. (1) After cleaning the joint surface of the bracket body and the bracket cover, determine the thickness of the added paper ...