silicone rubber for coating textile 

silicone rubber for coating textile Application:

silicone rubber for coating textile is specially used for skid-proof purpose of frilals, underclothes and widely applied for cotton fabric, polyester-mixed cotton cloth, nylon cloth, flax, woolen, insulating cloth, etc.

silicone rubber for coating textile Specification:

1) long working time during room temperature,

2) Vulcanizing quickly under high temperature,

3) Non heavy metal and solvent, non-toxic and innocuity to human body.

4) Excellent third dimension and softness after using the silicone rubber to the textile.

silicone rubber for coating textile Datasheet:

Model	TB3130
Appearance	Transparent
Hardness(shore A)	30±2
Mix ratio(A:B)	1:1
Viscosity(mPa.s)	60000~100000
Tensile strength(Mpa)	4.6
Tear-strength(KN/m)	19±2
Elongation(%)	360
Pot life/working time(25°C)	12-24 hours
curing time(100-120°C)	10~20(mins)

silicone rubber for coating textile Operation guideline:

1) Stirring A and B to uniformity before using.

2) Mixing A and B component according to A: B = 1:1 by weight or volume, coating the mixture on the textile or socks.

3) Baking the textile or socks in drying oven for 1-3min.

silicone rubber for coating textile Shelf life:

8-10 months when stored under 24°C in original unopened packages.

Any questions,please feel free to contact kaka:

TEL : 086-755-89212365

FAX : 086-755-89948030

MOBILE :086-18938867528

Website: www(dot)szrl(dot)net

E-MAIL:hyk(at)resinpu(dot)com

8 �in��O3style="width:51.3500pt; padding:0.7500pt 0.7500pt 0.7500pt 0.7500pt ; border-left:none; ; mso-border-left-alt:none; ; border-right:0.7500pt solid rgb(204,204,204); mso-border-right-alt:0.7500pt solid rgb(204,204,204); border-top:none; ; mso-border-top-alt:0.7500pt solid rgb(204,204,204); border-bottom:0.7500pt solid rgb(204,204,204); mso-border-bottom-alt:0.7500pt solid rgb(204,204,204); background:rgb(255,255,255); " >

4.2Mpa

26kN/m

35000

≤0.7%

440%

Wacker®M4503

white

100 : 5

30-90

10-20

25

5.0(N/mm²

> 20N/mm

40000

≤0.5%

350%

SmoothonMoldMax®25

white

100 : 5

45

24

25

577psi

130pli

25000

002 in./in.

375%

RTV molding silicone rubber for plaster products operation way:

Step One:Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping.Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 mins , otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.

Step Three: Brushing cast & Perfusion Molding operation

RTV molding silicone rubber for plaster products frequently asked question:

Why is the silicone rubber mold oily?

Basically, molding silicone rubber doesn't contain any oil, so it won't be oily. The reasons for the oily molds can be deducted from the below 3 factors:

1. Added white oil, which is the compound of silicone oil and white oil. The white oil is not silicone oil but a kink of petrochemicals;

2. Added too much silicone oil. Normally, we donot advise our customers to add any silicone oil into silicone rubber. If necessary, the ratio must be 5%-10%;

Need any help on silicone rubber, please feel free to contact Ms kaka:

Tel:86-755-89212365

Mob/Whatsapp:86-18938867528

E-mail: hyk(at)resinpu(dot)com

Skype:hyk(at)resinpu(dot)com