Pad Printing Silicon Rubber

1) High print times

2) abrasion resistance.

3) Good printing effects

4) Permanent and durable

Usages:

Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .

Description

Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.

Features:

1) High print times

2) abrasion resistance.

3) Good printing effects

4) Permanent and durable

Operation Instructions:
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the vacuumed mixture into the original mold slowly,when it turns dry,you can take the product out,then the mold is done.

Shelf life

8~10months, when stored in a dry & cool place under the room temperature 25.

Packing

20kgs/drum vacuumed packing

Dear friend ,

This is Ms Monica from Shenzhen Hongye silicone rubber company. We have more than 15 years experience in this field . Any more information, pls feel free to contact Ms. Monica:

E-mail: monicasilicone(at)gmail(dot)com

Tel: 0086-0755-89948006

Fax 0086-0755-89948030

Skype: monicasilicone

Wechat ID: ete394

Website: www(dot)szrl(dot)ne