platinum cured silicone rubber for tire mold

Description of platinum cured silicone rubber

platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It’s mainly suitable for tire molds making .

Advantage of platinum cure silicone rubber for tire mold

1)Non- shrinkage

2)high tensile and tear strength with high copy times

3) exceptional fluidity and good operability (mixing ratio at 1:1 )

4)high temperature resistant in 250 Centigrade

Operation instruction of platinum cure silicone rubber for tire mold

Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the mixture into the frame with original mold slowly .

Shelf life for silicon rubber for mold making

8~10months, when stored in a dry & cool place under the room temperature 25.

Packing for silicon rubber for mold making

20kg/drum for part A+ 20kg/drum for part B in one set

,200 kg/drum for part A+ 200kg/drum for part B in one set

Packing for silicon rubber for mold making

20kg/drum for part A+ 20kg/drum for part B in one set

,200 kg/drum for part A+ 200kg/drum for part B in one set

For further information, pls contact with Miss katherine

TEL: 086-0755-89948013

FAX：086-0755-89948030

Mobile: 086-18938867504

Mail : hyxg(at)szrl(dot)net

Skype：katherine858687

Facebook：hysilicon@gmail.com

MSN：hysilicon@hotmail.com

Welcome to visit www (dot)szrl (dot)net anytime .

http://www.youtube.com/channel/UCed-QO7UZneNYsWTxR1KFA

http://www.linkedin.com/profile/view?id=189510785&trk=nav_responsive_tab_profile_pic

https://twitter.com/Saminaray

https://www.facebook.com/mouldsilicone