Induction Heating Machines In Tube And Pipe Heating

Induction Heating for Tube and Pipe

Many industries and factories have laid a large number of pipelines inside their factories because of production requirements. Sometimes customers need to heat or insulate these substances flowing in the pipeline. Induction heating equipment can be used in the existing metal pipe network according to the actual situation. For example, pipeline pre-welding and post-welding heat treatment can be conducted to increase the welding quality. To complete this process, one should heat the pipeline before bending and heat the oil/gas pipes to hold the temperature and the pipelines with chemical material. A high-quality heat machine heater can heat the partial or whole pipeline network without large-scale modification of the on-site environment. This application widely exists in many industries such as medicine, PVC, petroleum, chemical industry, etc.

The Advantages of Pipes Induction Heater

The traditional heating machines will normally heat the tubes and pipes without partition temperature control. However, when using a professional rail heater machine, the heating temperature difference of different positions in the outer wall of the pipe or tube is small as the object is heated in a whole ring.

For welds with large pipe diameters, conventional heating machines often require 90,000 watts of power so as to achieve successful tube welding. And during the processing, if there is a heating piece burning, then this area will become the weakest place in the overall weld, which will further embed some hidden dangers to the finished tubes and pipes. However, this problem does not exist for pipes induction heater.

Compared with the conventional far-infrared resistance heating heat treatment, the induction heating treatment conducted by an induction pipe heater is simple, and it can effectively reduce the costs of labor and raw material.

Conventional far-infrared heaters are thermally conducted by heating sheets, and the transmission speed of these machines is slow and the heat loss is severe. Using the induction heating method, our pipes induction heater can better control the temperature difference between the internal and external walls, which effectively guarantees the mechanical properties of the welded joint.

In addition, similar to the metal induction heating machine, JKZ's pipes induction heater has the advantages of no open flame, high safety, high automation, small install space, easy maintenance, and long use life. Our induction pipe heater has made the pipeline heating method more popular.

Precaution Procedures of Pipes Induction Heater

When using the pipes induction heater, no matter it is a high-frequency induction heater or medium frequency induction heating machine, do not easily remove the grounding wire of the pipe heating machine.

Regularly check the air outlet and heat dissipation fan of the pipes induction heater so as to prevent the air inlet from being blocked and avoid overheating shutdown.

Clean up the heat sink of the induction pipe heater regularly to ensure that the electromagnetic induction of the pipeline is well ventilated.

As a professional induction tempering machine manufacturer, JKZ sells induction pipe heaters with both water cooling types and air cooling types. With flexible heating cables, the pipes induction heater produced by JKZ can freely wind on various diameters pipelines.