Resin Sand Casting
Product Quick Detail
- Packaging
- N/A
- Delivery
- 50 Days
Specifications
Resin sand casting is a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and solid mold. The resulted resin sand casting product
will have smooth surfaces, accurate dimensions, and less sand residual and casting defects on the surfaces or inside. During the resin sand casting process, some annexing agents also shall be
applied to improve the intensity of resin sand.
Basic Property of Resin Sand Casting Products
dimension tolerance ±0.3mm, CT5~7；
surface finish Ra5;
wall thickness up to 7mm;
unit weight extent 1~40000kg;
unit size limitation 0.03~3.5 meter;
degree of complexity- complex;
machining required- normal;
production lead time- short;
production cost- low.
Advantages Of Resin Sand Casting
Resin sand casting typically produces accurate results that are superior to other sand-casting methods.
This process also results in increased surface strength when compared to other sand-casting options
The nature of resin sand casting can help reduce defects such as sand holes, air holes, and shrinkage.
More flexibility with sizing
Resin sand casting can produce large iron castings. These resin bonded sand casting can range from dozens of kilograms up to several tons.
Resin Sand Casting Process
Compared with clay sand, the appearance quality of resin sand castings depends on the quality of the mold, thus resin sand requires a higher quality of the mold. The molding process when making it
better adapted to the needs of resin sand molding, mainly in the following aspects:
Machining allowance: The hardened resin sand castings have better stiffness and higher dimensional accuracy and are not easily deformed, so when choosing process parameters, a smaller machining
allowance can be selected, thus reducing the consumption of metal solution and the cost of machining, which can improve the dimensional accuracy of the castings.
Mold slope: resin sand in the mold has a certain hardening strength, smaller yielding, larger friction if the use of knocking method to start the mold, easy to damage the mold, while the resin sand
poor repairability, start the mold if damaged, more difficult to repair. When using resin sand molding, according to the actual production and product structure should increase the mold drawing
slope, can smoothly start the mold, get the quality with the market for castings product appearance quality requirements continue to improve, resin sand castings in the quality of the advantages
will be increasingly important, resin sand casting production process, will also be rapid development and popularity.
Surface roughness of the mold: the roughness of the mold surface plays a decisive role in the surface roughness of resin sand castings, thus minimizing the surface roughness of the mold is an
important measure to obtain high-quality castings.
Raw Materials of Resin Sand Casting
The correct choice of raw materials is the basis for reducing the cost of resin sand casting. The choice of raw materials has a greater impact on resin bonded sand casting cost. Because the raw
material is good or bad, on the one hand, affects the number of various materials added and consumed, on the other hand, affects the quality index of the casting.
Selection of raw sand
The original sand is divided into ordinary sand, washed sand, scrubbed sand, and other types because the mud content in the scrubbed sand has been very little, so it can greatly reduce the waste of
resin, should be the first choice, followed by washed sand, but never use the original sand without treatment.
Selection of resin
Resin is more expensive and has a greater impact on the casting cost. If you choose a poor quality resin, not only affects the quality of the sand, resulting in more casting scrap but also
increases the amount of resin added, the direct result is to make the casting costs increase.
Selection of other raw materials
Other raw materials include curing agents, paint, binder, release agent, sealing clay bar, etc. The impact of these raw materials on the quality of the casting is not the main, but the impact on
the cost of casting should not be ignored, such as the amount of curing agent added to the different, not only due to the impact on the productivity of the molding process and affect production
costs, but also affect the cost of materials. Therefore, the selection of other raw materials principle is to consider both its quality, but also to consider its match with the main materials such
as procurement, transportation, and other issues.
Rayforce Manufacture is a private castings company, we provide metal casting china, vacuum die casting, furan sand moulding and etc. Want to know more? Please contact us.
- Country: China (Mainland)
- Business Type:
- Market:
- Founded Year:
- Address:No.1-101, building no.18, gate no.189, Nanneihuan street, Yinze district, Taiyuan city, Shanxi province, China
- Contact:rayforce com
Other products from Shanxi Rayforce Manufacture Co., Ltd.
Relate products of Resin Sand Casting
Sand Casting
Sand casting china is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy both can be used to do the sand casting. Types of sand casting is able to produce the part varying from several gram weight to ...
Green Sand Casting
Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to ...
Sodium Silicate Sand Casting
Sodium silicate sand casting is soluble in water in various amounts. A more common name for sodium silicate is water glass, which is used in iron or steel sand casting. The water glass works as a binder of the sand. Using sodium silicate sand binder allows the rapid production ...
