As a good door hinge manufacturers in China, ROEASY produces delicate the door hinge. The door hinge is a kind of home decoration hardware accessory. The door hinge hardware is usually a two-fold
type, which is composed of a pair of metal or non-metal blades connected by a shaft pin. A door hinge can be deemed as a part that connects the two parts of an object and makes it move. The most
common door hinge materials are iron, copper, and stainless steel. The disadvantage of an ordinary door hinge is that it does not have the function of a spring hinge. After installing the door
hinge, all kinds of beads must be installed, otherwise, the wind will blow the door panel. As a professional and the top premium door hinge supplier in China, ROEASY has all the door hinge types
you need.
How to Repair A Door Hinge
1. The wood screws do not match the wood and cause looseness
Failure status: When making furniture, the wood screws are not screwed into the wood with a screwdriver (screwdriver), but with a small hammer, so that the wood screws do not match the wood. When
the door is opened frequently, the wood screws that are nailed into the wood will cause sliding teeth due to vibration, which will loosen the door hinges.
The corresponding solution and repairing method: remove the door hinge, find the same length, but thicker than the original wood screw, and the wood screw that can pass through the hinge hole, and
then screw it into the door frame with a screwdriver (screwdriver). Or use an ax to chop a few small wooden wedges after the hinge is removed, dipped in the glue, and use a small hammer to drive
the screw into the screw L. After the glue is solidified, use a carpenter's shovel to shovel the exposed leftover wedges of the frame and re-use the original wood screws. Screw the screwdriver
(screwdriver) into the original hole position.
2. Improper selection of hinge screws and incorrect installation process lead to loosening
Failure condition: The furniture door hinge is loose, mainly due to improper selection of hinge screws and improper installation process during the production. The former situation is mainly
manifested in the furniture door leaf being too heavy, and the wood of the door frame is too soft, so the nail holding force is not strong. In addition, the optional hinge is small and the wood
screws are short, which causes the hinge to loosen.
Corresponding solution repair method: The repair method is: select an appropriate hinge and replace the screw. Generally, if the door length is more than 100 cm, one and a half pairs of 65 mm long
hinges should be selected, and 25 mm long wood screws should be used. For small cabinets, chests of drawers, and writing desks, when the door is 50 to 100 cm long, one or one and a half pairs of 50
mm long hinges should be selected, and 18 mm long wood screws should be used. For small doors such as bedside cabinets, a pair of hinges with a length of 40 mm and wood screws with a length of 16
mm should be selected.
Rongtai Group is a modern modern hardware wholesale market in china guangzhou that combines manufacturing, technique, trading and service. We provide soft closing hinge, undermount drawer slide,
etc.