The brass ball valves for water is evolved from the cock. Its opening and closing part is used as a sphere, which uses the sphere to rotate 90° around the axis of the valve stem to achieve the
purpose of opening and closing. The ball brass valve can cut off, distribute and change the flow direction of the medium, and the Carbo oem brass ball valve also has a good flow regulation
function. As a professional brass ball valve supplier, we are committed to providing high-quality brass ball valve and services for customers. The different types include brass ball valve with
drain, press ball valve and so on. If you want to buy brass gas ball valve and learn more about our brass ball valve specification and the brass ball valve price list, please feel free to contact
us!
How to Repair the Brass Ball Valves for Water?
BY CARBO
When the 1.5 inch brass ball valve is leaking, you should first find out the cause of the ball valve leaking internally and the specific location of the water leak. If the cause of the ball valve
leak and the location of the water leak are different, the treatment method will be different, so we should repair according to the actual situation of the brass ball valve for water.
If it is because the handle of the ball valve is not closed properly, the ball valve cannot be closed tightly, and there is a water leakage problem, then the handle of the ball valve needs to be
removed, and then the handle is corrected with pliers, and then the handle is installed back. Generally, water leakage problem can be solved.
If it is because the valve core of the ball valve is rusted to death, the ball valve cannot be closed tightly, and there is a water leakage problem, then it is generally difficult to repair. You
can only try to remove the ball valve, and then drop some lubricating oil into the valve core position. To see if the rust death problem can be solved. If the problem cannot be solved, then you can
only directly replace with a new ball valve fitting of the same specification and model.
If the ball valve is damaged, it can only be replaced directly with a new ball valve. Before replacing the pex pipe ball valve, you need to go to a hardware store or buy brass ball valve with the
same specifications and model as the old ball valve online. If the owner will not replace the ball valve, it is best to ask a professional to come to help replace it, so as to avoid problems.
Once the ball valve leaks, but the owner fails to repair or replace it in time, the water leakage of the ball valve will become more and more serious. Over time, it will affect the life of the
owner and may also cause economic losses. So be sure to repair the water leakage of the ball valve in time.
How to install a brass ball valve?
Ensure that the installation position of the ball valve and the pipeline are in a coaxial position. The two flanges on the pipeline should be kept parallel. Confirm that the pipeline can bear the
weight of the push ball valve. If it is found that the pipeline cannot bear the weight of the ball valve, provide corresponding support for the pipeline before installation.
Confirm whether there are impurities, welding slag, etc. In the pipeline, and the it must be purged clean.
Check the nameplate of the ball valve, and perform full-open and full-close operations on the press ball valve several times to confirm that the valve can work normally, and then check all the
details of the valve thoroughly to ensure that the valve is intact.
Remove the protective covers at both ends of the valve, check whether the valve body is clean, and clean the inner cavity of the valve body. Since the sealing surface of the ball valve with drain
is spherical, even tiny debris may cause damage to the sealing surface.
If you need any kinds of bronze ball valve, please contact us, as a professional bronze valve supplier, Carbo is willing to offer you high quality products.