How to Prevent Rust Treatment of Aluminum Profile Cold Forming Machine
The gear oil used in the machine tool of the aluminium forming machine must be introduced into the automobile fuel tank after severe stress. The automobile fuel tank of the china cold roll forming
machine must be cleaned before loading. The aluminum roll forming machine is generally recommended for application No. 31. The hydraulic oil machine equipment is the oil equipment of 46 machine.
The cold forming machine must do a good job in cleaning and maintaining the oil and the machine, which has a good effect in preventing the machine from scaling or oil leakage.
The initial use time of the cold forming machine shall not exceed two months. When replacing the cold forming machine, the filter shall be cleaned together with the car oil tank. The filter can be
put into gasoline for cleaning. Compressor lubricating oil must be stored in a clean and dry place, If it is not moldy, the cold forming machine can still be used after careful inspection.
Check the machine and equipment frequently for moisture. After finishing the work of one shift, use hydraulic cylinder for cold forming. If the cold forming machine is not used for a long time, the
surface shall be coated with antirust agent.
Rolling Shutter Slats Roll Forming Machine's Characteristics and Operating Procedures:
1. 8MF aluminum cold bending machine is a new product developed by BOSJ. The hydraulic transmission system is selected, which has the characteristics of the stable transmission system and too much
pressure. The round steel can be formed multiple times, and the design scheme of the improved automobile chassis is selected to ensure that the application is not deformed.
2. The distance between driving wheels is adjustable, 2.2m and 1.45M respectively. When only one and a half materials are processed, the spacing of 1.45M shall be selected..
It is convenient to replace the spare parts, and it can be used again only by tightening the screws to the assembly line.