2in 1 SPD for CCTV M10-24 D05J4

2 in 1 monitor lightning arrester(power and network), a Kind of SPD, designed for a digital camera to protect camera power, data line from lightning electromagnetic pulse, induced over-voltage, operating overvoltage.

Feature of 2in 1 SPD for CCTV M10-24 D05J4

Multi. Protection circuits, Gas-Tube+ TVS technology

Dual protection in Common module and different module

2 in 1 protection；RJ45 connector for IP camera;

Far infrared rays camera; FIR camera preferred surge protective device.

TVS array technology, low capacitance

Multi-Strike Capability

Application Of 2in 1 SPD for CCTV M10-24 D05J4

Designed to protect monitor equipments (Power, Control), widely applied in bank monitor & safe guard system.

security and protection, loss prevention system, crime prevention service

2 in 1 SPD of power supply control.

IP camera for access control system and burglar alarm

Protect power supply and control line for camera

Guard tour system; Parking lots management system; Security integration.

ISA;IASP; VSCS; ESA; ACS; exit-inlet control system; exit-inlet control system

Technical Parameters of 2in 1 SPD for CCTV M10-24 D05J4

Model M10-24/D05J4 M10-12/D05J4 M10-220/D05J4

Lightning projection zone(LPZ) 2

Standards Compliance IEC61643-1, EN60950,GB/T18802.21-2002,TB/T2311-2002, YD/T1235.2

According to IEC61643 III

According to DIN VDE6075 Part6(Draft 11.89) A1,A2 D

Max continuous operating voltage Uc 5VDC

Nominal discharge current (8/20µs) In 3KA

Max discharge current Imax (8/21µs) Imax 5KA

Transmission rate Vs 100Mbps

Limiting Voltage(10/700µs)component wire-component wire ≤20V

Nominal working voltage(Un) 24V 12V 220V

Max continuous operation voltage(Uc) 30V 15V 275V

Nominal discharge current Imax(8/20µs) 5kA

Max discharge current Imax(8/20µs) 10kA

Load current 0.5A

Protection level Up ( In) ≤100V ≤60V ≤900V

Response time (Ta) 1ns

Mounting Be Installed between protected equipment and signal line

Working conditions Clamped type

Dimension 112*60*25mm

Interface form RJ45

IP code(IEC EN 60529) IP20

Error rate ≤10-12

Material/color Aluminum/Blue

Insertion loss ≤.0.5dB

Working conditions Temperature: -40 to 85℃, Relative humidity: ≤95％

Now the price of surge protector for security cameras is reasonable, if you have needs, please contact us.

Techwin Inc. is one of the most professional surge protection companies in China. With matured experience in surge protection technology, Techwin surge protection device(SPD) China manufacturer, whose spd surge arresters obtained 28 technology patents and multiple certifications such as CE, ROHS, TUV, UL, CQC, ISO9001, ISO14001, ISO45001 and so on. Telecom, electric power, CCTV, railway, intelligent transportation, solar wind power, petrochemical engineering and other industries all need spd protection devices, our surge protector factory can provide surge protector arresters in line with the latest international and domestic standards.