Tobee® Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3×2×13 through 8×6×14 pumps all feature the same power end, which ensures
production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The
MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The Magnum has an open impeller design that
contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in
Magnachrome™, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or
close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.
SPECIFICATIONS:
• Sizes from 3x2x13 to 10x8x14
• Flow rates from a few gallons per minute up to 2,600 GPM
• Head pressure up to 550 feet
• Best utilized for applications requiring up to 200 HP
Design Features:
• Up to 50% more capacity from the 8 x 6 pump
•
Optimum pressure at low operating speeds
• Thicker casing to extend life from wear and corrosion
• New impeller design to reduce loads and
extend bearing life
• Larger, stronger shaft to reduce deflection
• Replaceable shaft sleeve in packing wear
area
• Larger, long-life bearings
• Replaceable stuffing box cover
• Smoother, non-turbulent flow throughout
casing
Typical Configurations:
3x2x13 6x5x14
4x3x13
8x6x11
5x4x14 8x6x14
6x5x11 10x8x14
Typical
Applications:
• Mud pumping – offshore/onshore
• Solids control
•
Dredging
• Leveling or Rig Platform (ballast)
• Barite, ferric oxide, and mineral oil
• Base drilling
muds
• Glass fibers
• Sugar processing
• Ash or coal conveyers
• Cement
Description Sandman™ Mission 14x12x22 Centrifugal Pump Mission Magnum XP Blender Pump is ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive, and difficult to pump. The compact overall dimensions make it an excellent choice for high volume ...
Description Sandman™ manufactures Mission 2500 Supreme type centrifugal pump grinding impeller H2524-XX-30 The Mission 2500 Supreme Fluid end parts available with Supreme Hard material that has a 400 Brinell hardness. The standard impeller, casing wear pad and stuffing box ...
Description Sandman™ offers Shaft 24028-33 (656420007) Mission XP Pump Shaft Inspection: Check for runout to see that the shaft has not been bent. If runout exceeds 0.003 inch, replace the shaft. Bearing seat area and oil seal area must be smooth and free of scratches or ...
20622A Gland Assembly Tobee® offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Mission Magnum Pump Parts ...
Description Sandman™ Mission Centrifugal Mud Pump Casing Tobee manufacture Mission centrifugal pumps and parts ,100% interchangeable for below model: Mission Centrifugal pumps Magnum type 3x2x13, 2500 Supreme 3x2x13, Sandmaster 3x2x13 Mission Centrifugal pumps Magnum type ...