DUPLEX STEEL PIPE/TUBE

The microstructure of duplex stainless steel pipe is approximately 50% ferrite (body-centered cubic structure) and 50% austenite (face-centered cubic structure) crystal structure. The two phases coexist as a stable mixture, but this is different from two-phase alloys, where one of the two phases appears as a precipitate. The alloying elements induplex steel tubes are ferritic (eg chromium, silicon, molybdenum) or austenitic (eg carbon, nickel, nitrogen), which means that they favor the formation of the ferritic and austenitic phases, respectively. As a professionalduplex pipe manufacturer in China, Yuhong Group provides quality super duplex tubing solutions.

DUPLEX STAINLESS STEEL PIPE/TUBE FOR SALE

Duplex stainless steels are part of the stainless steel family. Duplex( austenitic-ferritic) means their metallurgical structure consists of two phases. Compare with the normal 304 316 stainless steel, they can provide better corrosion resistance, particularly chloride stress corrosion and chloride pitting corrosion, and higher strength. And the duplex SS pipe has higher Chromium 20%-28%, and lower nickel, up to 9% and 0.05-0.50% than austenitic stainless steel, which gives good cost benefits.

ASTM A789/ASME SA789 Duplex Steel Pipe/Tube

Duplex Stainless Steel Pipe Grades

The most widely used is ASTM ASTM (American Society for Testing and Materials International), and ASME(American Society of Mechanical Engineers). And the general standard for the duplex stainless steel seamless or welded tube or pipe can be ASTM A789/ASME SA789, ASTM A790/ASME SA790, ASTM A928/ASME SA928. They give very detailed requirements on the material, test, and others.

DUPLEX STAINLESS STEEL APPLICATIONS

Pipe duplex is known for its excellent combination of good mechanical properties and high corrosion resistance. The wide range of advantages means that duplexss tube pipe

DUPLEX STEEL PROPERTIES

At elevated temperatures, mechanical properties such as strength and toughness, as well as corrosion resistance, of dual-phase steels are reduced. This phenomenon is called embrittlement. The worst temperature at which embrittlement occurs is 475 °C; however, the formation of α' phases can begin to occur at temperatures as low as 300 °C, which limits the maximum service temperature for dual-phase steels.

Typical duplex pipe material has higher yield strengths than typical martensitic, austenitic, and ferritic stainless steels. However, since intermetallics begin to precipitate above 300 °C and become brittle near cryogenic temperatures, their operating temperature range is narrow.

DUPLEX PIPING SPECIFICATIONS

WHY CHOOSE YUHONG GROUP AS YOUR DUPLEX STAINLESS STEEL PIPE MANUFACTURER?

Yuhong Group focus on duplex stainless steel pipe for more than 15 years. Our duplex stainless steel tubes have been exported to more than 55 countries in the world. Over 90% of our clients will place repeat orders because of our good quality and service. For YUHONG, quality is the very first importance. Asone of reliableduplex pipe suppliers, we always aim to provide the best quality product to our clients. If you are looking for good quality duplex stainless steel seamless or welded pipe. YUHONG will be your best choice. YUHONG provide varied duplex stainless steel pipe choices with different grades and specifications. From 6.35mm-219m in seamless type, and 6.35mm-3600mm in welded type. Believe you can always find the suitable one for your project. Customization is also available. YUHONG is always your good partner in China.