Silane cross-linked low-smoke halogen-free flame-retardant polyolefin cable material is convenient to use, not only can be quickly cross-linked under warm water cooking conditions but also can be naturally placed at room temperature for cross-linking without additional irradiation processing, which makes Silane cross-linked low-smoke halogen-free flame-retardant polyolefin cable material more widely used.
Through the radiation cross-linking process, the wire and cable can achieve the effect of flame retardant UV irradiatelow smoke zero halogen, which is suitable for large-scale and high-efficiency mass production of thin-walled insulation layers of wire and cables.
The Flame retardant grade pass IEC60332 Single vertical cable combustion test and Bunched cables combustion test.
Technical Data ofSilane Crosslinking LSZH
Technical Data Sheet | Model | ||||
Items | Material Properties | Test Standard | Test Condition | Unit | |
Physical Characteristics | Hardness | ISO 48 | 15S | Shore A | |
Proportion | ISO 1183 | - | g/cm³ | ||
Brittle Temperature | ISO 812 | - | ℃ | ||
Mechanical Properties | Tensile Strength | ICE 60811-501 | 200mm/min | % | |
Elongation | ICE 60811-501 | 200mm/min | Mpa | ||
Hot Air Aging | Tensile Strength Retention Rate | ISO37:2017 | - | % | |
Elongation Retention Rate | ISO37:2017 | - | % | ||
Electrical Performance | Volume Resistivity | ASTM D257 | - | Ohm-cm | |
Dielectric Strength | ASTM D150 | - | - | ||
Combustion Performance | Vertical Burning Test | UL 94 | 3.0/6.0mm | - | |
Smoke Density(With Fale) | ASTM D2863 | - | % | ||
Feature |
The Solution Center lets you find the industries and applications, where ourATP material products are used. Multiple compound solutions that support High Flame Retardant low-smoke and or zero-halogen properties. Provide our customers with more valuable products and sustainable development solutions.