PN-2000FB Respiratory Humidifier (Support Heated Wire)

Pigeon Medical Respiratory Humidifier PN-2000FB offers an integrated solution to provide humidified and warmed gas to those patients in need of mechanical ventilation or other respiratory supports. With built in servo control feedback system and alarm system, it incorporates to monitor constantly and provide visible and audible alarm according to the proximal and distal temperature respectively.

In addition, the over-heat protection will automatically perform thermal cut-off once the temperature of the heating plate excess 95oC to avoid any unexpected circumstances. PN-2000FB also supports heated wire on both disposable and reusable breathing circuit, ensure to avoid temperature loss and water condensation while the medical gas travels through the circuit.

Working Principle of PN-2000FB Respiratory Humidifier

Pigeon Medical Respiratory Medical Humidifier PN-2000FB is designed to use in hospital environment which can be capable with mechanical/ non-mechanical ventilation and oxygen therapy for adults. Meanwhile, it supports invasive ventilation, infant resuscitation and bubble CPAP and oxygen therapy for neonatal care.

With optional heated wire function, it matches with both disposable/reusable and heated wire/non-heated wire breathing circuit.

Features of PN-2000FB Respiratory Humidifier

Heated or non-heated wire temperature control with 3 different phases independently

Match with all kind of ventilators

Provide different connectors for pediatrics and adults breathing circuit

Built-in alarm function

Provide high quality aluminium clamp and slot plate for the blender to safely hang on the trolley

Specification of PN-2000FB Respiratory Humidifier

Model PN-2000FB

Power Source AC 220V, 50-60Hz (Optional: AC 110V, 50-60Hz)

Heated Plate 150W

Thermal Cut Off 95±6℃

Display Three digit, 0.56 inch, 7 segment Led

Temperature Monitoring 0-75℃

Max-temperature of Heated Plate 85℃

Heated Wire AC 23V 60W, 50-60Hz

Power Rate 220W

Alarm Yes

Temperature Control Setting Heated Wired Mode:

P1: 25-29℃, P2: 29-35℃,

P3: 35-39℃

Non-heated Wired Mode:

P1: 23-27℃, P2: 27-32℃,

P3: 32-37℃

Range 10-70oC, Accuracy: ±2℃ (In 25-45℃ temperature range)