Solar street lights use solar energy as the energy source. Capable of realizing conversion from photovoltaic to electricity through solar panels, the solar powered lights produced by Anern use
their batteries to store electricity during the daytime, and power the light through the controller at night to achieve the required functional lighting. As a mature china solar lights suppliers ,
Anern is a comprehensive enterprise with 12 years of experience in R&D, production, and sales of China solar lights. Anern owns dozens of product-related patents, and our different types of
solar lights are sold to more than 100 countries around the world, participating in the completion of thousands of government solar lighting projects.
Solar Light
How Do Solar Lights Work
Solar lighting uses solar panels to absorb solar radiation during the daytime and converts it to electrical energy. It is stored in the battery bank through a charge and discharge controller. At
night, when the daylight gradually decreases to about 10lux and the solar panel open circuit voltage is about 4.5V, the controller shall detect this voltage value and then direct the battery to
discharge and power the LED light source to realize functional lighting.
Solar Lights Replacement
Anern solar-powered light has engineering quality. We promise that the raw materials we used do not contain any defective or second-hand product.
When solar-powered lights failure occurs, please check the following places:
Please check whether the solar panel wire is connected to the lamp cap wire and tighten it.
When connected to the solar panel line, the battery indicator (red light) of the controller will always be on, if not on, the battery may be out of power. Place the lamp cap and the solar panel in
the sun at the same time and then observe the state of the controller indicator, to see whether the red light is always on and the blue light flashes slowly; If the indicator lights are not on,
please consult the engineer of Anern for further guidance.
Regularly check the remote. Press the remote control to see is there any flashing at the controller. If there appears no flashing, adjust the remote distance and then press the remote again to send
the signal. If this does not work, the remote of the solar-powered lights may be broken or you need to charge the remote.
Application of Solar lights
Collector, arterial, and highway lighting
Parking lots: illumination in both open and covered parking lots
Emergency phones and lights are located along the paths/trails. Lighting for tennis courts and running tracks
Lighting along the perimeter of the barrier
Portable Power and lighting for emergencies
Backup for Brown Out/Black Out Lighting
SCADA and water treatment are examples of remote activities.
Construction sites and high-risk or dark locations require security lighting and surveillance cameras.
DOT Bridges with obsolete or damaged electrical wiring
Hazard warning lights are installed at stop signs, crosswalks, and on met-towers.
Rest spots and restrooms in remote areas
Government and military applications, both permanent and temporary
For more information about china solar lighting system, please feel free to contact us!
Anern solar, as an excellent led light manufacturer, offers a wide range of led light street light for you to choose from.