The Turbine Oil Purifieris designed according to the different boiling points of water and oil. It consists of a vacuum heating tank fine filter, a condenser, a prefilter, a water tank,
an empty pump and an oil drain pump and an electrical cabinet. The empty pump draws out the air in the vacuum tank to form a vacuum. Under the action of atmospheric pressure, the external oil enters
the primary filter through the inlet pipe to remove larger particles, and then enters the heating tank. After heating, the oil of 40~75C passes through. Automatic oil float valve, this valve is to
automatically control the balance of oil in and out of the vacuum tank. The heated oil is separated into a semi-mist by the rapid rotation of the jet wing, and the water in the oil is rapidly
evaporated into water vapor and continuously sucked into the condenser by the vacuum pump. The water vapor entering the condenser is cooled and then returned to the original water and released. The
oil in the vacuum heating tank is discharged into the fine filter by the oil discharge pump to filter out the particulate impurities through the oil filter paper or filter element, so as to complete
the vacuum oil filter quickly. The whole process of removing impurities, moisture and gas in the oil makes the clean oil drain out of the machine from the oil outlet.