Nonionic Flocculants for Industrial Wastewater Treatment

SINOFLOC nonionic flocculants are high and very high molecular weight nonionic polyacrylamide polymers, in dry powder character. Our products have been specially designed for the industrial wastewater treatment process including paper, textile, and food industry and produced water from the oil industry, especially for the water with lower PH 1-3.

When SINOFLOC nonionic polymer is used in sewage treatment, our products could be used together with inorganic flocculants like polyaluminium or aluminum sulfate which will give a good performance. When SINOFLOC nonionic polyacrylamide is used in textile industry like starching, it can improve the textile’s adhesiveness and permeability and reduce the starch spots. When SINOFLOC nonionic polyacrylamide is used in oil industry, it could be worked as blocking agent, together with other chemical additives.

Application Tips:

The solutions of SINOFLOC non ionic polyelectrolyte must be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC nonionic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a “maturation” time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on nonionic flocculants, please consult with SINOFLOC team.

If you want to know the details of organic coagulants water treatment, Contact us.