HY302#Epoxy Resin
Description
HY302# epoxy resin is composed of two components, resin and curing agent, with mix ratio of 4: 1 ( Resin : Cure Agent = 4: 1 ) , suitable for and amine curing agents or their additive , It can be cured at room temperature and heated Cured.
Application
Widely used in Painting such as for floor, coating ect , It can also used for electronic potting , such as
power transformer, reactor, CCL, insulating paint, electrical appliances and laminated products and other fields.
Technical Parameters
Mix Ratio | 4: 1 |
Color |
A: 、B:
|
Appearance |
no visible mechanical impurity / liquid Form |
(eq/100g)Epoxide Value | 0.48—0.54 |
(eq/100g)Unhydrolytic Chlorine | ≤300 |
weight per epoxy equivalent (WPE)(g/eq) | 185-210 |
Viscostiy(mPa.S) | 10000-11000 |
(%) Volatile | ≤1.8 |
Colour | ≤3 |
(℃) Softening Point |
Characteristics
*Strong adhesion
*Good chemical corrosion resistance
*Thermal stability and electrical insulation.
* high toughness
*Low Shrinkage
Operation instructions
1. Clean the surface of your products , make it clean and dry
2: evenly mixing the seasoning ratio A:B=4:1
3 Introduction resin mixing evenly to the electronic equipment inside, so that it can be estimated
Warm tips :
1 It is forbidden to pour back the material into the Original packages even it is unused ;
2 construction to be dry and well ventilated space, Far away from the fire source;
3 stored in a cool dry place,Far away from light , and close the packages well .
4 Don’t contact with skin or eyes , Otherwise clean the skin with alcohol scrub, and wash with plenty of water and go to hospital in necessary
Package
20KG/drum package
220KG/drum package
Shelf life
Six (6) months when stored under dry and cool place by original package under 25℃
Tel: +86-0755-89212380
Mob: +86-13138850656
Skype: wendy.wen121
Email: hyjwya@szrl.net
Website: http://www.resinpu.com/
Provides multi-purpose adhesive cement dental, including Dual Cure cement resin, which could be used with pre-treatment products and offer high bonding strength, also RMGI-Luting cement, which provides a simple and efficient restoration bonding solution. Different Types Of ...
Machines and Materials For Your Needs Eplus3D sla 3d printing machines are available from entry-level models to big size machines for industrial grade rapid prototyping. With the advanced processes for industrial SLA 3D printing with the most various resin materials optional, ...
The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns). It can be used as moulding material, spraying material and composite modified pre-dispersion. Types of Grade PF PEEK Pure Resin Fine Powder ZYPEEK Supplier PF Series-770PF PEEK Pure Resin ...