Epoxy Resin

Packaging
20KG/drum package 220KG/drum package
Delivery
3 Days

Description

HY301# epoxy resin is the most widely and largest quantity needed ,It is used by two components, resin and curing agent, with the mix ratio of 2: 1 ( Resin : curing agent 2: = 1) . Particularly suitable for the Insulation of mica material, epoxy glass steel insulating board and the reinforcing material. Because of its moderate viscosity, It is particularly suitable as a glass steel anti-corrosion lining material hand lay up method, such as for : large cement tank, storage tank, tank iron requirements of anti-corrosion. With room temperature curing agent , easy Operation by hand, and the glass cloth firmly stuck in the lining material surface, the formation of epoxy glass steel anti-corrosion layer. So it is widely used in chemical factory,winery, sewage treatment device corrosion occasion. HY301 epoxy resin is suitable for the preparation of solvent free or less solvent coating, strong anti-corrosion ability , small environmental pollution.

Application

It is particularly suitable as a glass steel anti-corrosion lining material , such as for : large cement tank, storage tank, tank iron requirements of anti-corrosion. With room temperature curing agent , easy Operation by hand, and the glass cloth firmly stuck in the lining material surface, the formation of epoxy glass steel anti-corrosion layer. So it is widely used in chemical factory,winery, sewage treatment device corrosion occasion.

Technical Parameters

配比 Mix Ratio 树脂: 固化剂= 2: 1
颜色Color A:淡黄色、B:白色

A: Light Yellow B: White

外观 Appearance 无明显机械杂质 / 液体

no visible mechanical impurity / liquid Form

环氧值 (eq/100g)Epoxide Value 0.41—0.47
无机氯值(eq/100g)Unhydrolytic Chlorine 0.03
有机氯值(eq/100g)Hydrolytic Chlorine 0.014
挥发物 (%) Volatile ≤1
色泽号Colour ≤6
软化点(℃) Softening Point 12--20

Characteristics

*Moderate viscosity

*Strong corrosion resistance

*The construction of small environmental pollution

*Manual operation

Operation instructions

1. Clean the Surface of your products, make it clean and dry,

2: evenly mixing the resin and cure agent at ratio of 2:1,

3 Brush the mixed resin on the surface of your products evenly , and then put a layer of Fiberglass , then brush a layer of resin , then repeat the ways above.

Warm tips :

1 It is forbidden to pour back the material into the Original packages even it is unused ;

2 construction to be dry and well ventilated space, Far away from the fire source;

3 stored in a cool dry place,Far away from light , and close the packages well .

4 Don’t contact with skin or eyes , Otherwise clean the skin with alcohol scrub, and wash with plenty of water and go to hospital in necessary

Package
20KG/drum package

220KG/drum package

Shelf life

Six (6) months when stored under dry and cool place by original package under 25℃

  • Country: China (Mainland)
  • Business Type:
  • Market:
  • Founded Year:2006
  • Address:
  • Contact:Raemon Shi
*Your name:
*Your Email:
*To:SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

TopCEM Adhesive Resin Cement
TopCEM Adhesive Resin Cement

Provides multi-purpose adhesive cement dental, including Dual Cure cement resin, which could be used with pre-treatment products and offer high bonding strength, also RMGI-Luting cement, which provides a simple and efficient restoration bonding solution. Different Types Of ...

Shandong Huge Dental Material Corporation

Eplus3D Resin 3D Printing
Eplus3D Resin 3D Printing

Machines and Materials For Your Needs Eplus3D sla 3d printing machines are available from entry-level models to big size machines for industrial grade rapid prototyping. With the advanced processes for industrial SLA 3D printing with the most various resin materials optional, ...

Eplus3D

Grade PF PEEK Pure Resin Fine Powder
Grade PF PEEK Pure Resin Fine Powder

The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns). It can be used as moulding material, spraying material and composite modified pre-dispersion. Types of Grade PF PEEK Pure Resin Fine Powder ZYPEEK Supplier PF Series-770PF PEEK Pure Resin ...

Jilin Joinature Polymer Co.,Ltd.