cng compressor
Product Introduction chinacoal05
1.CNG compessor of low specific power
2.capacity of 2Nm3/h
3.oil-free lubrication
4.energy save, wide suction rage
Main Parameter
model | MF5 CNG |
Charging rate | 5.0 Nm3/h,3.0cfm |
Filling time | tank 60L(0-200bar) 2.5hours |
Working pressure | 200bar/3000psi |
Driven by | electric motor(explosion proof EEX) |
Power | 2.2kw/3hp,380v/50hz,single/three phase |
Dimension | 600*600*1040MM |
Weight | 180kg |
Noise | 60db(A) |
CNG Plant Rich methane gas meets with rich gas ethane reheated by cooling heat exchanger, this steam of gas flows through the CNG compressor to increase pressure to 25Mpag, CNG product can be obtained. The compressor skid adopts motor drive, and an ASPRO piston dynamic balance ...
A water-lubricated oil free screw air compressor is a machine that exclusively utilizes water, eliminating the need for any lubricating oil. This design prevents environmental pollution and emissions. The compressed air within the stainless steel cylinder body is cleansed by ...
By employing two-stage compression, an intermediate cooler can be introduced between the stages. This allows the compressed gas, after the initial compression stage, to undergo isobaric cooling, reducing its temperature before entering the subsequent cylinder. Lower temperature ...