Pellet Cooler for Sale/Counterflow Cooler Supplier

Pellet cooler for sale/counterflow cooler supplier is key equipment in the pellet production line, which mainly cool the wood pellets from pellet mill with high temperature and much moisture. The direction of air in the cooler is opposite to the flowing pellets in order to evaporate moisture from the wood pellets. When the moisture evaporation, the heat of wood pellets will also be removed from the pellets.

The pellet cooler for sale/counterflow cooler supplier is used to reduce the temperature of hot pellets from pellet mill to ambient temperature. If hot and moist pellets are not cooled, they may brake in to powder again. The pellet cooler is a normally counter flow type cooler where the airflow is opposite to the direction of flow of pellets. The cooler works on the principal of blowing air through columns of hot & moist pellets, which results in evaporation of moisture from the pellets. For moisture evaporation, heat is taken from the pellets leading to cooling of pellets. To achieve the required cooling effect, pressure and volumetric flow rate of air, length of column and the residence time will play an important role. It consists of intake air lock, cooling chamber, grid gate, blower, pipeline and cyclone assembly.

Pellet cooler for sale/counterflow cooler supplier adopts the advanced international counter-flow cooling technology, which make pellets cool full and uniform. Unique slide valve discharging mechanism makes nesting smooth and reliable operation. After cooling, the pellets temperature is no more than room temperature 3 ℃ -5 ℃, and the precipitation rate is not less than 3% -3.5%. The temperature must be quickly cooled down, and the moisture content must be reduced to less than 12 percent for storage and handling. Our cooler can manage both of these processes simultaneously.

This pellet cooler for sale/counterflow cooler supplier is widely used to cool various kinds of pellets. It has special discharging frames for stability and easy sliding, and it can be used together with a secondary volute separator. Moreover, the cooler can automatically discharge cooled pellets to avoid cross-contamination with subsequent feedstock.

This tipping counterflow cooler is also used to cool a wide variety of pellets. The tipping discharge device is controlled by flexible hydraulic system, and its discharging speed is adjustable. Its rotating material sprinkle device can reduce the rate of pellets breakage effectively. Materials flow evenly and smoothly.

Contact Infomation

Email: info@sinoftm.com

Website: http://www.woodpelletmillchina.com/pro/pellet_cooler.html

Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China