Usage : The high speed machine is used for drawing electrical copper rod from 8.0mm to 1.2-4.0mm which can be annealed before the outletwire is woundby the dual take up device or coil machine .
Main capability characteristic :
1, The drawing blocks rank in a horizontal row , and the cantilevers of all die holders are very short and in equal length .
2, The surface of drawing blocks is coated with tungsten carbide power which is strong in hardness and wear proof,having long life span .
3, Main drawing machine and dead-block are driven separately, and all the dies can be changed conveniently and easily .
4, Contionous dual take up. automatic reel-change, the automatic reel-change can be done at more then 99% effeciency .
5, Driven by DC motor, the imported PLC and touch screen(siemens or preface,which is convenient for the operator to set and display .
Metal tech Pointing Machine is It is the auxiliary machine of the wire drawing machine, which is used to roll the wire into thin pieces so as to pass through the drawing die of each pass at the initial stage of drawing. Get pointing machine for wire drawing directly from wire ...
Technical specification: 8 blocks 550mm 5.5mm inlet to 1.8 mm outlet Low carbon steel material Designed with Rotating die holder The drawing machine including: Wire scaling and brushing system Dead block machine Complete electrical control board Power: 380 V 60 Hz ...
Wire drawing machine is used for steel, aluminum, copper and other metal wire drawing. The metal wire rod can be drawn by single machine of the unites depends on its sizes. Along with Wire\'s drawing, the rear coiling block is accelerated. simplicity of operator, efficient, ...