JA203# Polyurethane Resin

JA203# Polyurethane Resin

Are you looking for good quantity Polyurethane Resin? Please contect with me --

Tel: +86-0755-89311348

Mob: +86-18938867547

Skype: COCO006OU

Facebook: hyb(at)resinpu(dot)com

Email:hyb(at)resinpu(dot)net

1. Description--JA203# Polyurethane Resin

JA203# polyurethane resin is a polymer material developed material， room temperature curing， two-component, with low viscosity, small odor, soft, transparent glue. For it’s good advantages of Wear resistance, yellowing resistance, UV resistance and never hardens,it is widely used for outdoor application.

2.Application--JA203# Polyurethane Resin

1)Used in aviation, railways, construction, sports and other aspects;

2)Surface varnish for wooden furniture and metal;

3)Insulation for storage tanks, pipes, cold storage, beer, fermentation tanks, cold preservation barrels

4)Waterproof for building insulation

5)Used for prefabricated polyurethane sheet

6)For the products making of plastic products, wear-resistant synthetic rubber, synthetic fibers, hard and soft foam products

7) For adhesives and coatings;such as for :all types of wood, chemical equipment, telecommunications equipment and instrumentation and surface finishing of various means of transport, toys, handicrafts, hand model, gifts, etc.

3.Technical Parameters--JA203# Polyurethane Resin

4. Characteristics --JA203# Polyurethane Resin

＊Good radiation resistance , yellow resistance and good hardness, it is very suitable for outdoor products

＊Good resistant of UV and aging

＊Non change hardness, not easy broken, no shrinkage and non deformation ,and good adhensive ,and good sunshine resistance for the long time using

＊Low viscosity, and good leveling

5. Operation instructions --JA203# Polyurethane Resin

1, Operated under the conditions of ventilation environment.

2, prepare the tools , and make sure it is clean ,dry . Un-oil ,and not contact with any chemical Solvent

3, Weigh part A and part B exactly ( multi-component part A will leads to the bottom of the bubble, multi-component B may cause surface sticky).

4 Carefully stir in the same direction to avoid a large number of bubbles, you need patience and stir until completely transparent.

5, Vacuum Pumping : Vacuum pumping by vacuum machine

6.Warm tips --JA203# Polyurethane Resin

1 The humidity should less than 60% if using by hand , you would better to use a dehumidifier

2 You would better to use metal or plastic tools instead of wooden articles .

3 You should make sure your products is very dry , and can not use inks containing glycerol.

4 This product (especially B glue) can’t contact with skin , otherwise please wash with plenty of water and soap

5 Resin will be cured with High temperature and cured very fast

6 Far away from children to prevent eating.

7. Package

2KG/Set or 10KG/set packing

8. Shelf life

Six (6) months when stored under dry and cool place by original package under 25℃