Floor deck roll forming machine 2

Floor deck roll forming machine mainly by the left and right body, the bottom of the rod, the top cover, sliding seat, sheaves mechanism, cam mechanism, lubrication pumps, hydraulic system, electric control parts and other components. Meanwhile floor deck roll forming machine table indexable by the head mounted on the gear shaft, gear transmission dial off, toggle mounted on the hexagonal shaft sheave wheel to achieve Indexing, the upper shaft with each end of a shaft mounted on the same conjugate with the back pressing cam cam plate positioned by the positioning rod and the lower mold to achieve precise positioning in the operating position. The left and right sides of the chassis, equipped with lubrication pump, machine work through the tubing to each friction moving parts conveyor lubricant. And Floor Deck Roll Forming Machine installed on the slide mold is box structure, slide rails and the body rails, the contact length is greater, the upper die every punch, step on the mud that has twice the upper die stamping the first tile blanks in place, an increase of 10 mm on the mold, so that the full exhaust after the mud, and then press down on the mold blank tile in place, before returning to the highest position, so long mold life, pressed products of good quality . Automatic Roll Forming Machine configuration will have a lubrication system, the machine is running, floor plate roll forming machine automatically for all load bearings, gears and other parts of kinematic rail lubrication.