Electronic potting compound silicone rubber

Shen Zhen
Guang Dong
Packaging
packaging in 10kg 20kg 50kg 100kg
Delivery
15 Days

Typical Application of electronic potting compound silicone rubber:

electronic potting compound silicone rubber is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc. Silicone Rubber Electronic Material for good elasticity is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.

Description of electronic potting compound silicone rubber:

electronic potting compound silicone rubber is a newly insulating material

silicon of silicon compounds. It cures without heat, corrosion and just with little shrinkage.

It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.

Features of electronic potting compound silicone rubber:

1. No toxicity, solventless, no odor and no cure by-product.

2. Equal amount of mixing ratio, good fluidity, easy processing.

3. No significant exotherm or shrinkage during curing.

Technical Parameters of electronic potting compound silicone rubber:

Before Curing

Appearence Black/Transparent Fluid
Density(25°C g/ml) 0.98±0.02
Viscosisty(25°Ccps) Part A 500±100:Part B:800±100
Mixing Ratio A:B=1:1(By weight)
Operating Time(25°C hr) 5
Curing time(80°C hr) 0.5

After Curing

Hardness(Shore A) 0-40
Dielectric Strength(KV/mm) 23
Volume Resistance(Ω.Cm) 1.0×10 15
Permittivity(1.2MHz) 3.0
Temperature Resistence(°C) -60~200
Fire Resistance UL94-V1

(Pls note: all data of this product above in 25 °C with 55% humidity conditions. We don’t guarantee a same data if testing under different conditions, or when data was regenerated)

Precaution of electronic potting compound silicone rubber:

1. Twelvemonths from date of shipment when stored at 24C in original unopened packages.

2. This kind of product is nondangerous product, it can be transported as general chemicals.

3. Products exceed the storage life should be confirmed normal before using.

Operation way of electronic potting compound silicone rubber:

1.Put part A and part B in separate container with equal dosage and stir evenly when mixing the two parts together.
2. Put the mixture into the vacuum machine under 0.08 MPa for 5 minutes.
3. The temperature influences the curing time of electronic potting silicone rubber. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

Need any help on silicone rubber, please feel free to contact Ms Sandy:

Tel:86-755-89212369

Mob/Whatsapp:86-18938867593

E-mail: hyjw@szrl.net

Skype:sandy19385

  • Country: China (Mainland)
  • Business Type: manufacture
  • Market:the whole world
  • Founded Year:2006
  • Address:Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China Zip: 518117  
  • Contact:Sandy Yin
*Your name:
*Your Email:
*To:Shenzhen Hong Ye Jie Technology Co., Ltd.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

3D printing service processing template model custom transparent nylon silicone rubber compound die turnover
3D printing service processing template model custom transparent nylon silicone rubber compound die turnover

Main Products:rapid prototype,3D printing,small volume production,CNC machining,vacuum casting, moulds making, injection production Business Type:Manufacturer, Trading Company Categories: Mechanical Parts & Fabrication Services ...

Jierui Prototype Technology Co.,Ltd

HY-210 Condensation Cure Electronic Potting Silicone Rubber
HY-210 Condensation Cure Electronic Potting Silicone Rubber

HY-210can be applied to the sealing and pouring of various electronic components, and then forming insulation system with no corrosion and negligible shrinkage. HY-210is suitable for bonded seal of electronic components, power module and control module, LED invertor potting, ...

Hong Ye Silicone Rubber Company

HY-9055 of Electronic Potting Silicone Rubber
HY-9055 of Electronic Potting Silicone Rubber

1.Product Feature of Electronic Potting Silicone Rubber HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the ...

Shenzhen HongYeJie Technology