generator charger

Protection characteristics:

A short-circuit protection, overload protection, over voltage protection;

Reverse connection protection: positive and negative when the battery and charger output polarity reverse connection, the charger does not work, no output;

Short circuit protection: when the charger output happens to be short circuited, automatically turns off the output charger, need to disconnect the AC power supply, restart before charging.

When the charger when charging, automatically adjust the current different rate by detection of the battery during charging voltage. The charger with charging the most advanced technology.

Current: 6-12A

Voltage: 12V, 24V

Charger 12V 5A

Introduction: the charger for lead-acid battery design, the use of AC/DC switching technology, is a high efficiency charger.

Characteristic.

Current limit, voltage limit;

Short circuit protection;

Reverse polarity protection;

Technical parameters:

Efficiency: >82%

Input: AC220V ± 25%

Charger 24V 10A

Protection characteristics

Short circuit protection / overload / over voltage protection; reverse connection protection: positive and negative when the battery and charger output polarity reverse connection, the charger does not work, no output; short circuit protection: when the charger output happens to be short circuited, automatically turns off the output charger, need to break up stream power, restart before charging;

When the charger when charging, automatically adjust the current rate through different battery voltage to rise. The charger with charging the most advanced technology.

Current: 6-12A

Voltage: 12V, 24V

Charger 24V 10A

Charger 24V 5A

Introduction: the charger for lead-acid battery design, the use of AC/DC switching technology, is a high efficiency charger.

Characteristic.

Current limit, voltage limit;

Short circuit protection;

Reverse polarity protection;

Technical parameters:

Efficiency: >82%

Input: AC220V ± 25%

Output voltage: 27.1V ± 0.5% (Note1)

Output current: 5A ± 10% (Note2)

Reverse current: < 2mA at -10 ° 65 °

Note 1: the output voltage to 24V cell in voltage even after a full charge.

Note that the maximum charge current 2: restricted.