How Roll Forming Machines Work
Roll forming machine is composed of four major parts: the entry section where the metals are fed, the station rollers where rolling of metals take place, the cut off press where shaped metals are cut, and last is the exit station where the finished product comes out.
The entry section
This is the part where the metals are loaded. Usually, materials that are inserted in the entry section are in the form of sheet or coiled metals. Metals that are usually fabricated using this process include copper, steel, aluminum, and stainless steel.
The station rollers
Usually, rollers are placed at the top and bottom and the metal that enters the machine are bended in between these rollers.
The cutting section
The process has two systems in terms of cutting: precutting and post cutting lines. However, the latter is the most common. In a precut line, the material is cut off at a specific length before the rolling and bending process. On the contrary, the post cut line allows a continuous operation and the metals are sheared after the said process.
The exit station
It is either placed in tables manually or moved in a conveyor.
http://www.xinnuochina.com
细节 型号:RNMN 固体 CBN、RCMX 固体 CBN、PCD 开槽刀具、PCD 雕刻刀具 1、轧辊加工用PCD、PCBN刀具 ...
模型 LH8B6SL LH11B6SL LH14B6SL LH17B6SL LH19B6SL LH22B6SL LH24B6SL LH27B6SL LH30B6SL LH33B6SL LH36B6SL LH41B6SL 锻造站 6S 6S 6S 6S 6S 6S 6S 6S 6S 6S 6S 6S 截面积(MM) 8 11 14 17 19 21 24 二十六 三十 三十二 三十五 三十八 切割长度(MM) 20 40 45/55 ...
The upper rollers of the machine can be moved vertically and horizontally. The vertical lifting is the hydraulic transmission. The hydraulic oil in the hydraulic cylinder acts on the piston rod to obtain horizontal movement. Torque is transmitted through the turbine rod box, ...