Cross Roller Slew Bearing is with rolling elements in a 90°cross arrangement at a ration of 1:1. Due to the roller transmit load in a single direction, and the contact area of roller is bigger than the ball, so the rotational torque is less than a ball type design, it can ...
Cross roller slewing bearing is with rolling elements in a 90°cross arrangement at a ration of 1:1. Due to the roller transmit load in a single direction, and the contact area of roller is bigger than the ball, so the rotational torque is less than a ball type design, it can ...
Cross Roller Slew Bearing is with rolling elements in a 90°cross arrangement at a ration of 1:1. Due to the roller transmit load in a single direction, and the contact area of roller is bigger than the ball, so the rotational torque is less than a ball type design, it can ...
XSU 14 0644 cross roller slewing bearing without gear teeth 714*574*56mm is able to bear axial loads,overturning torque and relatively high radial loads. It is used for slewing conveying machines, welding operating consoles, light and medium duty cranes, excavators and other ...
XSU 14 0644 cross roller slewing bearing without gear teeth 714*574*56mm is able to bear axial loads,overturning torque and relatively high radial loads. It is used for slewing conveying machines, welding operating consoles, light and medium duty cranes, excavators and other ...
Main parameter: Material:GCR15,SUJ2,AISI52001 Hardness:HRC60 65 Out diameter tolerance:0.001mm Length tolerance:0.03mm Parallelism:0.01mm Perpendicularity:0.01mm Endface runout:0.01mm Roundness:0.0005mm Roughness:Ra0.06um Main uses: 1.Crossed roller bearings 2.Joint bearings ...
NSK cross roller bearing Sealed cross roller bearing ...
Product information: Our product is made of thickened mineral oil, refined by a special producing process, added various kinds of additives, anti-wear agents, high efficient anti-oxidation, anti-rust, anti-corrosion and etc. Dropping point: Lithium ...
The single-row crossed roller slewing bearing is composed of 2 seat-rings, characterized by its compact in design, light in weight, strict producing accuracy, small fabrication gap and high requirements for mounting accuracy. The rollers are arranged in cross 1:1. This kind of ...