Changzhou Fanqun SZG Series Double Cone Rotating Vacuum Drier

Changzhou Fanqun SZG Series Double Cone Rotating Vacuum Drier - Changzhou Fanqun Drying Equipment -Top China Drying Equipment Manufacturer

*About Changzhou Fanqun SZG Series Double Cone Rotating Vacuum Drier

Bried introduction

Double-cone rotating vacuum drier is a new drier that integrates mixing and drying in the one body and equips with condenser and vacuum pump. Therefore the vacuum drier is formed(If the solvent does not recover, the condenser may be not used).The drier is advanced in design, simple in inner structure, easy to clean, to discharge all raw material, convenient in operation, lowing the strength of labor and improving word environment. Meanwhile raw material is rotating accompanying with the rotating of container, the wall of container can not only save energy but also make raw material dry evenly and have good quality. It can widely apply to dry raw materials of pharmaceutical only save energy but also make raw material dry evenly and have good quality. It can widely apply too dry raw materials of pharmaceutical industry, chemical industry, foodstuff industry, and dyestuff industry and so on. The equipment is in conformity with the requirements of "GMP".

Principle of work

Model SZG double-cone rotating vacuum drier has double cone rotating tank. Under the state of vacuum inside the tank, pass steam or hot water into to jacket for heating. The energy can contact with the damp raw material through the inner wall. The vaporized steam can be pumped out through vacuum exhaust pipe when the damp raw material absorbed heat. Because the inner of tank is in the state of vacuum and the raw material is turned over all the time caused by the rotating of tank, the drying speed of raw material is quickened and drying efficiency is raised too and the purpose of uniform dry can be raised.

Application　　

The drier is suitable for drying and mixing powder or granule raw material of pharmaceutical industry, foodstuff industry and chemical industry and so one. Especially it is suitable for the following raw materials that have special requirements:

1.Thermal sensitive raw material that can not undertake high temperature;

2.Raw materials that are easy to be oxidized or to be dangerous;

3.Raw materials in which the solvent needs to recover and there is toxic gases;

4.Raw materials that have the requirement of containing rather low content of residue volatized materials;

5.Raw materials that need to mix evenly and fully.

*About Changzhou Fanqun

Changzhou Fanqun focused on international companies with names such as, P&G, DSM, BASF, Huntsman, Umicore, Englehard, Solvay, Evonik, Ensysta, Roche, to name a few.