Addition cure silicone rubber for tire mold making

FOB Price
USD $10.99 / Piece
Place Of Origin
China
Minimum Order
200
Packaging
If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail. If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail a
Delivery
3 Days

Addition cure silicone rubber for tire mold making

Addition cure silicone rubber for tire mold making typical application:

Addition cure silicone rubber for tire mold making is primarily intended for tires making , and can be used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry,a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.

Addition cure silicone rubber for tire mold making description:

Addition cure silicone rubber for tire mold making is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high- temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.

Addition cure silicone rubber for tire mold making datasheet:

Product E620
Appearance Translucent
Hardness(shore A) 20±2
Mix ratio(A:B) 1:1/10:1
Viscocity Part A(mPa.s) 23000±2000
Viscocity Part B(mPa.s) 3500±500
Tensile strength (kgf/cm2) 45±5
Tear-strength (kN/m) 20±2
Elongation(%) 500±50
Pot life/working time (mins) 30-40
Curing time/setting time (hrs) 3-4hrs(25°C)

110-20mins(60°C)

Shrinkage rate (%) 0.1

Addition cure silicone rubber for tire mold making operation:

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water)

on your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Addition cure silicone rubber for tire mold making package:

If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.

If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.

About us:

Equiped with REACH SGS ISO9001 ISO14001 etc. certificate

Professional technician with rich experience

Need any help on silicone rubber, please feel free to contact Ms Cherry:

Tel:86-755-89948294

Mob/Whatsapp:86-18938867593

E-mail: hyjc(at)szrl(dot)net

Skype:hyjc@serl.net

  • Country: China (Mainland)
  • Business Type: Manufacturer
  • Market:Europe,Africa,Americas,Emerging Markets,European Union,G20,Middle East,Oceania
  • Founded Year:2006
  • Address:Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China
  • Contact:Cherry Wu
*Your name:
*Your Email:
*To:深圳红叶杰科技股份有限公司11
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

SiSiB® HR0100 General Purpose Heat Cured Silicone Rubber for Molding
SiSiB® HR0100 General Purpose Heat Cured Silicone Rubber for Molding

SiSiB® HR0100 is general purpose heat cured elastomer for molding. Technical Data Product HR0130 HR0140 HR0150 Appearance Translucent Translucent Translucent Hardness (Shore A) 30+/-2 40+/-2 50+/-2 Williams Plasticity 130+/-20 160+/-20 215+/-24 Tensile Strength (MPa) Min. 4.0 ...

Nanjing SiSiB Silicones Co., Ltd

Platinum Cure Molding Rubber Silicone RTV
Platinum Cure Molding Rubber Silicone RTV

Model Color Mixing ratio Pot life (mins) Demouled time (hrs) Hardness(A0) Tensile-strength (kgf/cm2) Tear-strength (kgf/cm) Viscosity (cps) Elongation (%) HY-E625 translucent 1 : 1 30-60 4±1 25±2 35±2 25±2 6000±3000 ≥400 HY-E630 translucent 1 : 1 30-60 4±1 30±2 40±2 ...

SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD

HY-605 RTV-2 Mold Making Silicone Rubber
HY-605 RTV-2 Mold Making Silicone Rubber

HY-605 is a kind of room temperature vulcanized silicone rubber incondensationtype.It’sgenerally named astwopart silicone rubber ,Part A is a flowable liquid, part B is the curing agentor catalyst . It’s mainly used for mold making . HY-605 silicone rubberisusedformaking ...

Hong Ye Silicone Rubber Company