LS110A split transmission meter has three independent testing units to measure the transmittance value of ultraviolet light, infrared light, and visible light. It is used for the transmittance testing of glass, plated film, organic materials, solar film and other translucent materials such as insulating glass, filmed glass, PMMA materials etc.
Parameters
1. Dimension: 140mm × 82mm × 92mm (length × width × height);
2. Weight: 680g;
3. Resolution: 0.1% for measured value<10% and 1% for other ranges;
4. Accuracy: better than ±2% (Colorless and transparent material);
5. Test sample size: > 40*40mm
6. VL Peak wavelength: 550nm;
7. UV Peak wavelength: 365nm;
8. IR Peak wavelength: 950nm;
9. Power supply: built-in lithium rechargeable battery;
Features
1. Two-parts dual mode of the main and auxiliary part facilitates the transmittance measurement of the automobile front windshield glass and building glass.
2. The built-in lithium rechargeable battery is easy for use without replacing the battery;
3. Use the USB port of computer to charge the meter via the built-in charger;
4. The laser alignment function guarantees the accurate alignment of the main part with the auxiliary part in the process of measurement and ensures accurate measurement.
5. Three light Transmittance Meter in one device; result is the average of three values
6. Two laser for two part alignment, more accuracy.
Introduction The WEM3080T is a bi-directional, din rail, 3 phase energy meter online which can be used to monitor 3 phase 4 wire system(WYE connection) . It is a highly integrated 3 phase energy meter with a Wi-Fi module embedded, which measures the voltage, current, active ...
The LS183 spectrum transmission meter use ultraviolet light source, infrared light source and visible light source to illuminate the tested transparent material. The sensor detects the light intensity of the three light sources and the light intensity after transmitting the ...
1. Three light sources share a test hole, which can obtain 380nm-760nm visible light transmittance, 940nm infrared and 365nm ultraviolet transmittance in one measurement, easy to operate and save time. 2. Parallel light design, the measurement results of testing large thickness ...