Specifiction
Silicone Fiberglass Fire Sleeve Industry Grade Specification
- Inside diameter: 4 mm to 152 mm
- Length: 15, 20, 30 mtr coils
- Color: red, black, blue,etc.
- Wall thickness: 4 mm +/- 0.5mm
- Main Raw Material : E-fiberglass yarn , silicone rubber
- Temp Range : Withstands 260 Deg C continuous / 1200 Deg C intermittent heat
Details
Silicone Fiberglass Fire Sleeve Industry Grade Details
Base Fiberglass Substrate
- Fiber Type: E Glass
- Specific Gravity: 2.54-2.69
- Breaking Tenacity: 1.71 gf/TEX. Std. 1.71 gf/TEX Wet
- Tensile Strength: 450,000-500,000 psi.
- Breaking Elongation: 4.81% Std. 4.81% Wet
- Elastic Recovery: 100%
- Average Stiffness: 2824.3 cn/TEX
- Effect of Heat: Will not burn; Retains 75% tensile at 343°C; Softens at 732-877°C; Melts at 1121-1182°C.
- Effect of Acids and Alkalis; Resistance to acids is fair. Good resistance to most alkalis.
- Effect of Bleaches and Solvents: Unaffected.
Silicone Rubber Coating
- Durometer, Shore A: Initial; 35 Aged 240 hours at 200°C; 45
- Tensile Strength (psi): Initial; 875 Aged 240 hours at 200°C; 800
- Elongation %: Initial; 500 Aged 240 hours at 200°C; 200
- Flammability, UL94; V-1
- Dielectric Strength (volts/mil); 485
- Tested Range: 8.0-12.5kV
- Dielectric Grade A
Application
Silicone Fiberglass Fire Sleeve Industry Grade mainly used:
- Insulates wiring, hoses, oil / brake / transmission lines & more
- Use for bundling and protecting hoses, electrical wiring etc.
- Burn protection during under hood repairs and maintenance