Silicone Rubber Self-fusing Tape

Silicone Rubber Self-fusing Tape

It Is Non Adhesive, Only Bonds to Self. Conforms to Irregular Shapes. Forms Air-Tight & Water-Tight Seals. Easy to Remove, Leaves No Messy Residues. Resists to Weathering, Salt Water and UV Rays. Class H Insulation. Works on Oily, Dusty, Wet Objects and Surface. But Must Make Sure No Dust, Oil, Water, Chemicals between Different Layers of The Tape.

Application

Used for Automotive, Marine, Electrical, Plumbing, Sealing, Insulating and General Purpose Applications. Include Water Hose & Pipe Repair, Weatherproofing Electrical Connections, Fittings & Hose Seal, Bundling Wires, Boat Rigging, Sport & Tool Handles, Plumbing Repair, Rope Ends, Bicycle & Wheelchair Handle Wraps, Emergency Radiator Hose Repair, Emergency O-Rings & Seals.

Direction

Peel Back Short Portion of Protective Film. Make One First Complete Over – Lapping Wrap of Tape onto Itself with Less Stretch.

Stretch Tape and Continue Half Overlaid Wraps onto Itself. Again Make One Final Complete Over-Lapping Wrap at The End.

For High Pressure Leak, Wrap 3 to 5 inches in Each Direction Away from The Leak. Stretch to Maximum(by >30% Elogation), The Tigher Wrap, The Quicker and Stronger Bonds. Wrap 3 or More Layers. For Non-pressure Application, A Minor Stretch Will Do Good.

To Remove, Just Cut by a Knife or Scissor. For Long Shelf Life, Store the Tape in Sealed Package before Use.