made in china colloidal silica for battery

FOB Price
USD $500.00 / Piece
Place Of Origin
China (Mainland)
Minimum Order
1
Packaging
Polyethylene buckets
Delivery
15 Days
: 1. The application in the precision casting industry instead of silicic acid ethyl ester, non-toxic, not only can reduce cost, improve the operating conditions, high dimension accuracy, good casting finish, can make the shell mold strength is big, modelling is better than using sodium silicate quality. High temperature resistant coatings for mold, can make the coating has good heat resistance, reduce loss of high temperature molten metal of mould and help to release.
2. Applied in coating industry: can make the paint and firm, and has a waterproof, fireproof, pollution resistance, high temperature resistant, film hardness, bright color, not faded, etc. Can also be applied to acid, alkali resistant, fireproof coating and coating of far infrared radiation.
3. The binder applied to refractory material: with high bond strength, resistance to high temperature (1500-1600 ℃), etc.
4. Applied in textile industry: diameter can be used for spinning sizing agents, reduce end breakage rate. Used in textile dyeing, such as caking, fluid can form a good protection, increase the adhesion dyeing, and so on.
5. Used in paper industry: as sensitive paper treatment agent, cellophane anti-sticking agent;Other office paper after processing, can improve the printing effect, make the color more bright.
6. Used in catalyst: in catalyst production, under certain conditions, as to accelerate the speed of catalytic carrier, in order to improve production efficiency.
7. The application of oil: in aromatic nitriles in the production of silicone monomer as catalyst, to improve the recovery rate of aromatic nitrile has opened up a new way. In the oil industry, made from silica sol binder and catalyst.
8. The application of the battery: ordinary lead-acid battery service life is short, if the use of the product can be configured to solid electrolyte battery, greatly improving the service life of the battery;At the same time, ordinary sulphuric acid electrolyte, in motor vehicle turn to the overflow, but the use of solid electrolyte battery is very good solve the problem, effectively prevent the leakage and overflow of sulfuric acid, to avoid the environmental pollution.
9. The application of steel rolling: after adding a certain amount of colloidal silica coating solution can improve the appearance of the insulation coating, insulation, heat resistance, and can reduce the expansion coefficient of coating, to improve an magnetic.
10. The application of enamel: in the manufacture of enamelware, after joining silicon sol can decrease the expansion coefficient, to improve the four fluorine caking property of PVC, glass add 25-30% of silica sol, can get high quality of boron silicate glass.
11. The application of the radio equipment: colloidal silica can be used as the TV picture tube adhesive;Do transformer core, with its adhesive bonded silicon steel sheet into an organic whole, and can play a role of insulation, high temperature resistant, the effect is very good.
12. The application of ceramic fiber: stick aluminium silicate fiber impregnated with silicon sol, adding coagulant, temperature, used for heat preservation heat insulation materials;Do the high temperature furnace refractory binder surface, high bond strength, high temperature (above 1000 ℃), save energy, namely save for the modification of the furnace, and convenient.
13. Semiconductor polishing agent, to do the big particles of silica sol monocrystalline silicon polishing agent, not only effect is good, and the polishing speed.
14. The application of the foam rubber: add 5% in dry rubber colloidal silica, can make the porous foam rubber reinforced by 20%, for a certain volume of rubber, because more flexibility, can save 20% of the rubber.
15. Silica sol can as clarifying agent of soy sauce and rice wine, and shall not affect the color, aroma and taste. Silicon non-toxic to human body, there are certain cancer anticancer effect.
16. Use silicon sol process of chemical fiber decoration items, can make its polluting reduce twice, visible colloidal silica is also effective antifouling agent on the surface of the mural cloth, etc.
17. Use silicon sol of non-slip floor wax, has negative ChengMing in industrial and civil, prevent slippery effect is good, and do not affect soft luster.
18. The colloidal silica is an excellent water purifier. It is mixed with aluminum sulfate, can make the metal salt and water to remove suspended muddy thing together.
19. The fuel oil to add a small amount of silica sol, can prevent the burning ash after assembled on the diesel engine.
20. Do far infrared radiation coatings with silica sol binder is good, high temperature resistance, will not affect the radiation.

Hubei Jin Wei group home page http://www.jwway.com/en/index.html

  • Country: China (Mainland)
  • Business Type: 生产厂家,
  • Market:美洲,欧洲,亚洲,大洋洲,中东
  • Founded Year:1994
  • Address:hubei wuhan weilaizhiguang 6# 608
  • Contact:shengfeng Tang
*Your name:
*Your Email:
*To:Hubei Jin Wei new materials co., LTD
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

3V 240mah CR2032 with solder tabs/pins CR2032L-F1N button cell battery made in China factory
3V 240mah CR2032 with solder tabs/pins CR2032L-F1N button cell battery made in China factory

Product Description Product: Lithium button cell Model No.: CR2032L-F1N Brand: Malak (Self-owned Brand) Type: Lithium/Manganese Dioxi (LiMnO2) Nominal voltage: 3V Nominal capacity: 240mAh Diameter: 20mm Height: 3.2mm Weight: 3.2g Expiry Period: 6 years Certificate: UL, CE, ...

Shenzhen MALAK Industry Co., LTD

High quality CP1454 3.6V Li-ion LIR1454 85mah lithium battery for wireless earphone made in China factory
High quality CP1454 3.6V Li-ion LIR1454 85mah lithium battery for wireless earphone made in China factory

Product: lithium manganese dioxide battery Model No.: LIR1454 Brand: Malak (Self-owned Brand) Type: Lithium Manganese Dioxide (Li-ion) Nominal voltage: 3.6V Nominal capacity: 85mAh Diameter: 14.0mm Height: 5.4mm Weight: 3.2g Cycle Life: ≥300 time Certificate: UL, CE, ROHS, ...

Shenzhen MALAK Industry Co., LTD

Factory supply 1100 battery shell aluminum foil made in China
Factory supply 1100 battery shell aluminum foil made in China

Product Description Mingtai Al. can manufacture 1100 PE/PVDF coated aluminum coil with varieties of colors at customers’ demands with about 20 years experience. Besides, different tempers are available, such as O (annealed), H14, H16, H18, H24, H26 etc. And they are widely ...

Henan mingtai al. industrial co.,ltd