Made from Aramid fibre, mineral fibre & inorganic fillers bonded with NBR.
*Specifications
1.100% Non-asbestos
2.Wide range of temperature
3.Good abrasion resistance, ageing resistance
4. Excellent air sealability
5.Oil, heat, acid alkali resistant
6.Good flexility
7.Gasket Material produced by ourselves
Model | FRQ-350 | ||
Description | Made from Aramid fiber, mineral fiber & inorganic fillers bonded with Synthetic NBR | ||
Application | Suitable for oil resistant gasket material for medium loading, good resistance to water gases, oils and fuels, recommend used in the auto,engine and motorcycle application | ||
Properties | Test Method | Unit | Data range |
Density | - | g/cm3 | 1.65±0.1 |
Max short term temperature | °C | 450 | |
Max continuous operating temperature | °C | 250 | |
Tensile Strength (across) | ASTM F152 | N/mm2 | ≥12 |
Compressibility | ASTM F36J | % | 12±5 |
Recovery | ASTM F36J | % | ≥50 |
Creep Relaxation |
ASTM F38
16h @175°C |
% | ≤30 |
Ignition loss | DIN 52911 | % | ≤30 |
Sealability(Nitrogen) | DIN3535 | Cm3/min | ≤1.0 |
ASTM3# oil 5h@150°C | Tensile strength(across) | Mpa | ≥8 |
Thickness increase | % | ≤10 | |
Weight increase | % | ≤15 | |
ASTM Fuel B 5h@RT | Tensile strength(across) | Mpa | ≥6 |
Thickness increase | % | ≤10 | |
Weight increase | % | ≤15 | |
Dimension | mm | 1500×1500 | |
Thickness | mm | 0.5,0.8,1.0,1.5,2.0, |
Non-Asbestos Jointing Sheet are made of the frame materials including aramid fiber and synthetic mineral fiber after spe..... Non-Asbestos Jointing Sheet are made of the frame materials including aramid fiber and synthetic mineral fiber after special proportioning with natural ...
How To Choose High-Quality Magic Sponge? How to remove stubborn stains or dirty surfaces can achieve good results, which has always been a confusing problem for people. We always need something tough enough to remove those stubborn spots and stains, but not so tough that it ...