Rectangular and L-shaped tables /Work stations- OFFICE table

Upper and side scales with steel endings for partition wall horizontal and vertical profile finishes , pressure attached and with a coat of textured epoxy paint. Dimensions follow panel model and height

Metallic joining column with a 80 mm section that allows partition wall connection in angles of 90? and 180? and follow panel height. Finishing in textured epoxy paint in graphite, black or gray.

Partition wall from top to ground with an iron frame with BP plates or fabric-covered plates. Wiring passage on the baseboard or just under the cover.

Metallic self-load bearing angular frame in steel tubes with a 100 x 100 mm section, 2,20 mm wall, with internal wiring passage. Finishing in epoxy powder paint in black and adjustable shoe for floor leveling.

Metallic self-load bearing side frame, welded by MIG system, with steel tubes: horizontal crossmember with a 30 x 50 mm section, 1,20 mm wall, a vertical column with a 30 x 90mm section, 1,50 mm wall and internal wiring passage. Finishing in textured epoxy powder paint in black, cambered tips at the closure and adjustable shoes for floor leveling.  

Horizontal gutter for wiring made in 0,90 mm steel plate. Folded in a U shape, with separation of power cable from those of voice and data, with openings for socket attachment.

Wall partition provided with panel (when necessary) fastened between the tables to substitute the front panel and form a partition wall. Made in 18 mm thick agglomerate wood with textured low pressure melaminic plated finish on both sides. Edges covered with BS strips in the same color of laminated finish.

Front panel in 18 mm thick agglomerate wood. Covering in textured low pressure melamine coating on both faces.

L-shaped cover in a single part and rectangular covers made in 28 mm thick agglomerate wood. Covering in textured low pressure melamine coating on both faces. Active edge headed with PVC profile 180? and finished passive edge with BS strips in the same color of the laminated plate.

 Rectangular and L-shaped tables /Work stations

Technical Specifications:

Linha Sistemas 2