Hot tub spa 03

Hot tub


Massage bathtub
set up
*acrylic board  A grade
*1hp water pump
*shower three fuction movable shower : frog , acupunture nozzle , normal shower
*waterfall : stainless steel water fall -ss3014 style stainless steel  more effect for the anti stain
*chromed faucet ( brass )
*air star
*air regulation
*Big adjust jet
* water drainage
*small single jet
*Back rest  pv cushion with back jet good for the pain and old person
*pillow  two pc PV pillow , waterproof , easy to mavable to clean
*Glass skirt give more funny for transparent looking inside
*stainless steel support .
optrion

*ozone disinfection
* bubble machine
* water heater
*electrical control panel for the massage tub
*TV
*underwater lamp

out look
1Surface shall be uniformly shiny metal parts,Should not be peelingCracking, spalling, exposed at the end, discoloration and obvious spots, defects such as pits, rust site should be easy to do anti-rust treatment.
2, Decorative glass, there should not be scratched, crack, bubble, spots, defects such as chromatic aberration and distortion, should follow the "glass test".
3Decorative wood uniformly smooth surface, no cracks, scars, insects and other eye defects.
4Acrylic bathtub surfaces should be clean and smooth, the color should be uniform; no air bubbles, cracks and other defects; bath using surface gloss greater than 90%; logos, trademarks, etc. should be clear, correct, correct.
5Tub on the back of the deposited glass fiber should be smooth, does not allow for curing bad, bad impregnated, layered, burr, and vacuole and so on
.6Computer control panel, LCD TV screen displays handwriting should be complete, clear, contrast markedly; key surface, there should be significant dent, scratches, cracks, deformation, and stains and so on, touch sensitive control correctly.
7Underwater lights must be bright lights, the surface should be smooth, without obvious scarring, scratches, front edge, and glitch phenomena.
8Product installation, easy to reach the surface of the human body should not have glitches, flying edge defects such as.
9The installation of wood, iron feet, metal framework and plastic card connector size must be in strict accordance with the implementation of drawings.
10Massage Bathtub PVC pipe, wire arranged to be neat and beautiful.
11Cylinder and the skirt should be combined with sound, no obvious cracks, dislocation, Sawtooth and other defects.
12The accessory installation location should be correct, correct, no loose, error loading phenomenon.
13Massage cylinder pipe surface can not be yellow, black, or other stains; pipe interface to be strong, watertight and pipe turning angle can not be some folding.
14The nozzle must be installed in place, does not allow a clear gap and debris.

Performance

1, Pap hardness: acrylic bathtub Barcol not be less than 45 HBa.
2, hydro massage: a, the bath tub water nozzle should be barrier-free, adjustable nozzle to be flexible rotation. b, bathtub nozzle of the water level within the range, should be able to freely adjust the range between 150mm ~ 600mm.
3, sealing: a, massage bath tub of water to overflow into the mouth, start pump, so that the circulatory system running time of not less than 10min, the sealing surface of visual Massage Bathtub and piping connections should be no leakage of water phenomenon.
b, to stop pumps running 10min, visual Massage cylinder sealing surface and the interface should be no leakage of water piping phenomenon, drainage device mouth for one minute to allow a drop of water drops. C, hand plugged drain, open drain device, visual outfall should be no leakage of water phenomenon.
4, retention of water (water volume): stranded in the water bath at the bottom of the largest single block area of not more than 50c , and the total amount of water retention can not exceed 200g.
5, noise by grinding with a water pump bathtub, the pump should be good performance, action, flexible, noise should not be greater than 68dB.
6, radio normal, there are CD connected to port and working properly.
7, bath water temperature should not exceed the entrance circulation pump 50 , the temperature should be at 30 to 42 freely set within the measured temperature and set point temperature-point margin of error of

Hot tub
size:2140x1540x930
*ozone disinfection
* bubble machine electrical control panel for the massage tub
* water heater