13V-10SU product

Features
High Performance, Low Power AVR? 8-Bit Microcontroller
Advanced RISC Architecture
120 Powerful Instructions Most Single Clock Cycle Execution
32 x 8 General Purpose Working Registers
Fully Static Operation
Up to 20 MIPS Througput at 20 MHz
Non-volatile Program and Data Memories
1K Byte of In-System Programmable Program Memory Flash
Endurance: 10,000 Write/Erase Cycles
64 Bytes In-System Programmable EEPROM
Endurance: 100,000 Write/Erase Cycles
64 Bytes Internal SRAM
Programming Lock for Self-Programming Flash Program and EEPROM Data
Security
Peripheral Features
One 8-bit Timer/Counter with Prescaler and Two PWM Channels
4-channel, 10-bit ADC with Internal Voltage Reference
Programmable Watchdog Timer with Separate On-chip Oscillator
On-chip Analog Comparator
Special Microcontroller Features
debugWIRE On-chip Debug System
In-System Programmable via SPI Port
External and Internal Interrupt Sources
Low Power Idle, ADC Noise Reduction, and Power-down Modes
Enhanced Power-on Reset Circuit
Programmable Brown-out Detection Circuit
Internal Calibrated Oscillator
I/O and Packages
8-pin PDIP/SOIC: Six Programmable I/O Lines
20-pad MLF: Six Programmable I/O Lines
Operating Voltage:
1.8 - 5.5V for ATtiny13V
2.7 - 5.5V for ATtiny13
Speed Grade
ATtiny13V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V
ATtiny13: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V
Industrial Temperature Range
Low Power Consumption
Active Mode:
1 MHz, 1.8V: 240