We undertake development of gas burners for specific applications such as Flame Treatment gas burner for Plastic Printing, custom shaped gas burner for thermal sealing, automated gas pilot burner, etc.Gas fired Ceramic/ Steel braiding Medium wave Infra Red burnerThis burner has perforated ceramic tile or braided wire mesh of special material and gas burns completely within this media. Thus, there is no combustion below or above this tile or mesh and produce practically minimum flue gases as there is no excess air. Infra a red radiation are very effective in heating only the object placed in front due to its penetrative ability and does not have to heat air for transferring heat to the object. This leads to extremely low gas consumption for the heat out put produced, quick heating and consequential improvement in cost & quality. Infra Red gas burners can be completely automated for close loop control and have wide control range of 1:5. There are different types of infra red gas burnersa. Ceramic Burner- In this burner, combustion takes place within the perforated ceramic tile. This tile turns reddish orange and gives out medium wave infra red radiations (2.4 micron). Its source temperature is 950 deg C and it develops thermal power up to 120 KW/sq.m.(max). It find applications in industries such as; Textile, Paint, Powder Coating, Process Heating, etc.b. Metal Fiber Burner- In this burner, combustion takes place within the thin mesh of special steel. This mesh turns reddish orange and gives out medium wave infra red radiations (2.2 micron). Its source temperature is 1050 deg C and it develops thermal power up to 200 KW/sq.m. It find applications in industries such as; Textile, Paint, Powder Coating, Process Heating, Paper Drying, Coil Coating, etc.c. Porous Burner- In this burner, combustion takes place within the perforated tile which has two levels of perforations. Lower region has medium size pores and the upper region has large size pores. Gas/Air mix enters in lower region where it gets pre heated and burns in upper region. The heat removal from the combustion zone is mainly by radiation and conduction but is also by convection. This tile turns bright white at full power and gives out short wave infra red radiations (1.7 micron). Its source temperature is 1450 deg C and it develops thermal power up to 1000 KW/sq.m.(max). It find applications in industries such as; Paper drying, Paint, Powder Coating, Process Heating, Coil Coating, etc.
We undertake development of gas burners for specific applications such as Flame Treatment gas burner for Plastic Printing.
WHIRLPOOL DISWAHER WHIRLPOOL 6ED2FHKXVA SS REFRIGERATOR WHIRLPOOL 3WFG231LVS SS 30 INCH STAINLESS STEEL GAS STOVE WHIRLPOOL 3WFG231LVS SS 30 INCH STAINLESS STEEL GAS STOVE 220-240 VOLTS 50/60 HERTZ INVERTER DUCTLESS WALL SPLIT AC Inverter Reverse Cycle Room- Reduces Energy ...
Come From World Wide Voltage
In the laboratory, cell samples need to be placed in liquid nitrogen for cryogenic storage. However, some samples must not only be cryopreserved, but also stored in the gas phase without contact with liquid nitrogen. The former can be solved with a conventional liquid nitrogen ...
Introduction Set packed with hoses, regulator arm support of gas Torch Gas blow torch Specification Description Torch Set packed with hose, regulator arm support of gas Torch As a professional gas regulator manufacturer, we provides lpg gas blow torch, propane gas blow torch, ...
Come From Ningbo Shuai Xian Regulator Co., Ltd