Coal and water slurry burner

9) High-efficient desulfurizing and dedusting system

8) Configuration of on-line filter

7) Standardized pollutant discharge

6) Fuel adaptation and convenient regulation: the wind speed, wind volume
and the fuel supply can be regulated by frequency conversion. It is convenient
to regulate and is adaptive to the change of loads and different fuels. When
the current load changes, the fuel supply and wind supply can also be
adjusted simultaneously, reach a stable excess air coefficient between
1.15 and 1.2, and ensure safe and stable operation of the boiler

5) Long service life and reliable operation process: it uses combined inlaid
wearing-resistant ceramic and is able to service for 3,000 hours. The flame
is stable and can be adjusted to different furnaces, which is favorable to
maintain a safe distance with the heat exchange surface and avoid the slag
on the water-cooling surface. Inside the furnace, the temperature environment
and heat loading are equally distributed, and the hydrodynamic condition
is very stable, which could avoid not only the fire extinguishments and
internal explosions but also the corrosion of and slag on the heat exchange
surface

4) Excellent atomization and high thermal efficiency: this burner is designed
with special nozzle and atomizing disk, and could blend the primary air and
over fire air properly, featuring low excess air coefficient, good atomization,
easy ignition, stable inflammation and high thermal efficiency

3) High automatization and wide range of load regulation: this burner is
mechanically-and-electrically integrated. It was developed with the
combination of coal-water-mix fueled burner and on the basis of imported
burner, which is able to burn both the oil and coal-water fuel. It is controlled
by programmable controller and has automatic ignition, automatic rinsing,
automatic regulation of loads, and multiple safety chain protection. It is
highly automated and reliable and has PLC interface control upon clients'
requirements

2) Fuel compatibility: this burner can be fueled both by light oil and coal-water
mixture. During operation, the oil has the functions of ignition and combustion
supporting. When the coal-water mix system is broken down and being
repaired, the oil system can still run at rated load

Features:
1) Pleasant appearance and powerful functions: this coal-water-mix fueled
burner is detachable and has the same design with oil/gas-fueled burners.
It has pleasant looking and low noise. It is easy to operate

Detailed Product Description

CWS or CWM burner is use coal and water mixture slurry as the fuel.