industrial gas burners

The burners can be used with heat exchangers such as hot water boilers, steam boilers, air heaters, and for certain process applications. As the burners are capable of overcoming high combustion chamber resistances, they are used primarily on modern high rated boilers.

Application

The standard sliding two stage burner can be made to modulate with the addition of a capacity regulator. Modulating burners operate at any point within the regulation range, depending on the heat demand. The servomotor runtime is approximately 40 s. This precision enables the burner to operate with reduced excess air at full and partial load. Thus improving the combustion figures. The regulating range between partial and full load is also increased.

Modulation

For sliding two stage control, partial and full load are set positions within the regulation range. The burners firing rate slides between the two load points, depending on the heat demand, for which the servomotor runtime can be set between 30 and 120 s. Thus there are no sudden large increases or decreases in the amount of fuel used.

Two and three stage

Dependent on fuel, burner size and requirements, the regulation of air and fuel is by:

Regulation

Automatic air shut off on burner shut down

Easy to install, set and service

Burner housing can be hinged open

Quiet operation

Stable fan reference line - good combustion behaviour

Large capacity and operational ranges

Compliance with the most stringent directives and emission limits

Features

Size

Weishaupt industrial burners, sizes 30 to 70, has been especially designed for industrial capacity ranges. The monobloc burners are noteworthy for their large capacity and operational ranges

try industrial gas    to get through more products