Shipboard Electric Water Heater

Diko Ship Model water heaters are;
* Efficient: Serves you plenty of hot water with out using extra energy. Because most of the DIKO Marine Series products uses wasted engine coolants as an energy sources by circulating hot water, steam or oil through the thermal circuit serpentine exchangers immersed in the inner tank. Accordingly, they serves you plenty of clean hot water without using electricity power. Manuel power level control switches enables you to independently operate heating resistances. That provides the heater not to overstrain generator when it is not needed. Besides, the inner tank is isolated with polyurethane material to minimize the heat looses and maximize the efficiency.
* Durable: Considering the corrosive effects of the marine environment, all the materials used in the construction of DIKO Marine Systems water heaters are carefully chosen and manufactured with extra attention. Besides the inner tank, outer jacket and the electric control panel is electrostatic epoxy powder coated galvanize steel or ASTM 304L stainless steel. So the water heater resist to corrosion even if its jacket or outer parts are scratched or its paint damaged. Round tank design provide to withstand more pressure than square tanks. Additionally thermal circuit serpentines are manufactured from hot rolled ASTM A106 seamless steel tubes which are resistant to high pressure and temperature. And all the electric equipments and units are chosen and mounted considering the maximum lasting such as enclosure metal cable glands and magnetic contactors rated for 1, 500, 000 cycles in nominal operation conditions.
* Safe: For the safety of human and device, every detail is examined and all the electrical accessories are chosen according to provide maximum safety. High standard, temperature resist international Lloyd certificated relays, fuses and conductors are mounted in control panel units. Considering the extraordinary temperature differences which a naval vessel can receive, a cooling fan, temperature resistant fuses and conductors are mounted. All the outer parts such as switches, buttons, signal lams, displays which humans can came in to contact with are IP 65 enclosure water, dust resistant and gasket on device according to DIN40050-TSE3209 standards. Besides, for a better safety the door of the electric control panels are also covered with tight polyurethane joints and clamped. So it is prevented the dampness and humid air directly be in contact with electric units. Furthermore, flap gate of electric control panel box enables easy and safe operation while checking up or renewing heating elements for your comfort. Special lug wrench to renew the heating elements is extended to the standard package. Considering safety of the device, low water cut out alarm and signaling system to disengage electrically the heating elements in the event of insufficient water in the tank, high limit safety thermostat to power down the device in the event of overheating and ASME T & P relief valve to guard the potential risk that can be because of extraordinary temperature and pressure rises are standard in all DIKO Large Volume Ship Models electric water heaters. As a conclusion considering the human safety and health, safety door interlock mechanism which interrupts power to the control circuit upon opening the electrical control panel, leakage control system which shuts down power in an event of probable electric leakage, and 24V AC reduced control voltage which is under the danger limit for human body are added the standard equipments list and completely safe products even under the heaviest conditions are served behind World standards.

Diko Ship Model water heaters are;
* Efficient: Serves you plenty of hot water with out using extr