LD Single girder overhead crane
Product Details
Remote control.
Pendent wire.
Control method:
Overload protection: In the event of overload, the hoist unit switches off and only the lowering motion is possible.
Long and cross travel limited by means of preliminary and final limit switches
Travel end switches
A protective earth conductor is fitted as standard. A crane switch is provided.
Power supply cable and control cable along the girder
Cable inlet from cable gland
The entire equipment is easy to install and dismantle due to the use of threaded bolts and top-hat rails
All movements can be switched off by actuating the emergency-off switch at the control station via a main contactor.
Type of enclosure IP 55
The electrical equipment is accommodated in robust steel plate control cubicles, on the crane girder.
The sub-assemblies used by are standardized equipment of renowned manufactures and have been approved for specific crane operation by our test laboratory. Their characteristics regarding impact,vibrations, wear and safety were examined. A continuous high quality standard is ensured by series production and standardized sub-assemblies.
The crane that we are offering is designed to meet the required functions and requirement stated in your specifications, as well as for the operating conditions.
Electrical elements
Average thickness : about 100 microns
After manufacturing (after welding)
In factory before manufacturing :
Painting:
The crane girder is of welded girder construction. This result in lower dead weights with a high degree of vertical and horizontal rigidity and smaller wheel loads being transmitted to the crane runway.
Crane girder:
Rubber buffers
Motor for hoisting and travelling
Hook with latch
Motor Insulation class F
Main lifting motor with thermal protection
Overload protection
4 steps gear limit switches(up, down, low speed up-approach, phase fault protection)
Hoist hydraulic brake
Electric wire rope hoist:
All the standard which is required for the crane is the Chinese standard.
Design and construction rules:
Capacity:0.5t-16t
Span:4m-35.5m
Lifting mechanism:electric hoist
Working environment:-20-40 degree centigrade.
- Feature:Bridge Crane
- Span:4m-35.5m
- Max. Lifting Load:16t
- Rated Loading Capacity:0.5t-16t
- Model Number:LD
- Brand Name:HZ
- Place of Origin:Zhejiang China (Mainland)
- Country:China (Mainland)
- telephone:86-137-38072010
| Minimum Order Quantity: | 1 Set/Sets |
| Payment Terms: | L/C,T/T |
| Port: | Shanghai/Ningbo |
| Feature: | Bridge Crane |
| Span: | 4m-35.5m |
| Max. Lifting Load: | 16t |
| Rated Loading Capacity: | 0.5t-16t |
| Model Number: | LD |
| Brand Name: | HZ |
| Place of Origin: | Zhejiang China (Mainland) |
Send inquiry / quota request to LD Single girder overhead crane
Relate products of LD Single girder overhead crane
Single Girder Overhead Crane are widely used for lifting goods in factories, warehouses, and material plants. It has a reasonable structure and high overall steel strength. The single girder overhead travelling crane is usually used in conjunction with CD and MD electric ...
Come From Henan Tosta Machinery Co., Ltd.
The single girder gantry crane has the features of simple structure, easy installation, light weight, good wind resistance. The main girder is mostly bias rail box type structure, it is widely used in openwork sites, workshops, warehouses, materials stockyards, to load, unload ...
Come From Henan Tosta Machinery Co., Ltd.
Double girder overhead cranes are usually used in open warehouses or railways and other places to carry out common loading and unloading and material handling tasks. Thedouble girder overhead crane is a heavy-dutygrab bridge crane that is frequently used. Specification ...
Come From Henan Tosta Machinery Co., Ltd.
