HEPA Filter

Key Features - Hepa Filter

Description - Hepa Filter This Hepa Filter is designed to fit a standard 2' x 4' ceiling grid opening. At 90 FPM, the highest noise level recorded by an independent testing company is 50 dba. Supply air passes through a 20" x 20" xl" pleated type prefilter rated at 30% ASHRAE efficiency. The blower is a direct drive, forward curve blower. The standard motor is a 1/3 hp, 115 volt, 60 hz, single phase, permanent split capacitor type with thermal overload protection. Other voltages are available. Each module is equipped with a solid state variable speed control with RFI suppression, a safety switch and a 2" x 4" junction box mounted to the prefilter frame. The module is then ready for the "end user" to provide electrical hook-up. A one piece plenum is fabricated from 20 gauge steel with a white powdercoated finish. Four (4) seismic clips are provided at all top comers. Final filtration is the standard HEPA filter, 99.99% eff. @ .3 micron or larger. A white epoxy grille with a diamond pattern protects the filter. HEPA filters are tested according to accepted procedures in effect at this time and as described by Institute of Environmental Sciences (lEST) and/or ISO standards.

Model: 635-125